Brother networked printer

From Gentoo Wiki
Jump to:navigation Jump to:search
Translate this page
Other languages:

This document covers the installation of Brother printers.

Important
While this page should be self-sufficient to install a printer, it is recommended to read this page and the Printing page in their entirety before starting the installation.

User feedback

After having applied this guide to the printer, please update the following table so that other users can easily confirm if successful installations have been performed with their printer model or not:

Printer model Printer driver Printer? Scanner? Remarks
DCP-J785DW RPMs from Brother web site Works! Works! Connected by USB
DCP-750CW ? Works! Works! No remark
DCP-1610WE ? Works! TBD After WPS configuration printer used Zeroconf instead of DHCP!
DCP-7055W ? Works! Works! No remark
DCP-7070DWR net-print/brother-genml1-bin from brother-overlay Works! Works! Printer works through ipp, but not through lpd protocol. Scanner driver: brscan4
DCP-J100 RPMs from Brother website Works! Works! Scanner driver media-gfx/brother-dcpj100-bin from brother-overlay
DCP-J140W driverless — Alternatively, RPMs from Brother website can be used Works! Works! Please use Brother's Driver Install Tool to install printer and scanner functionality. You can download the install tool here: https://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=dcpj140w_all&os=127


Run via [root]# sh linux-brprinter-installer-<version> DCP-J140W

When it asks for DeviceURI, if you have a networked printer, you may have to specify the specific IP address of the printer.

The Brother printer installer script may not properly create /usr/libexec/cups/filters/brlpdwrapperdcpj140w. To get this file, first download the DCP-J140W driver source code from the Brother webpage (the same page that also provides the driver scripts). Then, after you gunzip and tar -xf the file, find the cupswrapperdcpj140w file. Inside that script is a "cat" command that creates brlpdwrapperdcpj140w. Copy and paste that manually to /usr/libexec/cups/filter/brldpwrapperdcpj140w. Then, just for safe measure, copy and paste (or symlink) the contents of /usr/libexec/cups/filters/ to /usr/lib64/cups/filter/. Once done, re-modify the printer through CUPS, and printing should work.

Scanner only works after emerging dev-libs/libusb-compat. Thanks to i92guboj for discovering this and posting it on the Gentoo Forums.

DCP-J925DW driverless Works! Works!
DCP-9020CDW net-print/brother-dcp9020cdw-bin in brother-overlay Works! Works! Works over network. Scanner driver media-gfx/brother-dcp9020cdw-bin with media-gfx/brother-scan4-bin from brother-overlay
HL-2240 ? Works! n/a [1] Not networked printer
HL-L2340DW driverless Works! n/a Alternatively any of net-print/brlaser (release >=6) and net-print/brother-genml1-bin from brother-overlay can be used. Both also work.
DCP-L2550DW driverless Works! Works! scanner over network works with

>=media-gfx/sane-backends-1.0.31-r2 SANE_BACKENDS: escl

HL-L2350DW net-print/brother-genml1-bin from brother-overlay Works! n/a No remark
HL-L2380DW net-print/brother-genml1-bin from brother-overlay Works! n/a No remark
HL-L3210CW driverless Works! n/a No remark
MFC-J4410DW Works! Works! Filter to copy is at /opt/brother/Printers/mfcj4410dw/lpd/filtermfcj4410dw but scanner not detected by xsane at the moment.
MFC-J870DW driverless, or alternatively net-print/brother-mfcj870dw in ulm overlay Works! Works! Driverless printing works, but not driverless scanning. Scanner driver media-gfx/brscan4 in Gentoo repository
MFC-J5910DW ? Works! Works! Filter to copy is /usr/lib64/cups/filter/brother_lpdwrapper_mfcj5910dw. Also requires dev-libs/libusb-compat (see section Common Troubles)
MFC-J6920DW net-print/brother-mfcj6920dw-bin from brother-overlay Works! Works!
MFC-9320CW net-print/brother-mfc9320cw-bin from brother-overlay Works! Works! No remark
MFC-9330CDW net-print/brother-mfc9330cdw-bin from brother-overlay Works! Works! Set up a socket based printer (seem to have better luck with it, test pages not working with lpp)
MFC-9340CDW net-print/brother-mfc9340cdw-bin from brother-overlay Works! Works!
HL-4570CDW net-print/brother-hl4570cdw-bin from brother-overlay Works! n/a No remark
MFC-7460DN ? Works! unknown No remark
DCP-7060D, DCP-7065DN, DCP-8080DN, DCP-L2520DW, HL-2230, HL-2240, HL-2240D, HL-2270DW, HL-2280DW, HL-5370DW/HL-5370DWT, HL-5440D, HL-5450DN, HL-5470DW, HL-6180DW, HL-L2320D, HL-L2360DW, HL-L2380DW, MFC-7360N, MFC-7460DN, MFC-7860DW, MFC-8480DN, MFC-8510DN, MFC-8710DW, MFC-8890DW, MFC-8910DW, MFC-8950DW, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW net-print/brother-genml1-bin from brother-overlay Works! unknown No remark
DCP-L2540DW, DCP-L2540DN net-print/brother-genml1-bin from brother-overlay Works! Works! Works over network. For scanner you'll need media-gfx/brother-scan4-bin from brother-overlay
MFC-8950DW ? Works! Works! Filter to copy is at /opt/brother/Printers/MFC8950DW/lpd/filter_MFC8950DW
MFC-5890CN ? Works! Works! scanner config command brsaneconfig3
MFC-9970CDW ? Works! unknown
MFC-9140CDN ? Works! Works! scanner requires dev-libs/libusb-compat to work (see section Common Troubles)
MFC-J5620DW Brother linux-brprinter-installer-2.0.0-1 Works! Works! installs nicely but needed dev-libs/libusb-compat to work. Maybe put a 'brother4' line in /etc/sane.d/dll.conf. Also needs editing of PPD and cups filter files to get duplex double-sided printing to work.
MFC-J480DW brother-mfcj480dw driver in andy ebuild repository Works! Works! Scanner driver media-gfx/brscan4 in andy ebuild repository
MFC-J6710DW brother-mfcj6710dw driver in brother-overlay ? ? See Printer_mfcj6710dw
MFC-J6720DW mfcj6720dwlpr and brscan4 Works! Works! Needs dev-libs/libusb-compat even for network scanning. Did not test USB, only network.
MFC-9130CW RPMs from Brother website + brscan4 from brother-overlay Works! Works! Printing is somewhat flaky with the Brother drivers (no landscape mode, bad margins sometimes). The generic CUPS postscript driver is compatible with this printer and doesn't have these issues, but also lacks several configuration settings from the proprietary driver.
MFC-9120CN Brother MFC-9120CN CUPS (color) (Official driver from Brother website) Works! Works! Filter to copy is at /usr/lib64/cups/filter/brlpdwrappermfc9120cn. Scanner requires dev-libs/libusb-compat even if used over network. Scanner config command is brsaneconfig3.
MFC-9560CDW net-print/foomatic-db Brother MFC9840CDW Foomatic/Postscript works, but duplex is not available works with media-gfx/brother-mfc9560cdw-bin from brother-overlay Official mfc9560cdw.ppd downloaded from Brother does NOT work
MFC-9142CDN Brother MFC-9142CDN CUPS (color, 2-sided printing) (official driver from Brother website) Works! Works! Filter to copy is at /usr/lib64/cups/filter/brother_lpdwrapper_mfc9142cdn. Scanner requires dev-libs/libusb-compat even if used over network. Scanner config command is brsaneconfig4.
HL-3170CDW Official Brother-hl3170cdw RPM Drivers Works! N/A Right after copying the filter, printer was visible in the GNOME setting's "Printers" section. For printer to work though, remove that printer and install the printer from scratch, selecting the LPD printer option when prompted.



Make sure you install app-text/psutils; The filter uses psnup. If using usb make sure to add a udev rule as per gentoo documentation. Copy the filter over to cups; cp /usr/lib64/cups/filter/brother_lpdwrapper_hl3170cdw /usr/libexec/cups/filter/
Finish up with /etc/init.d/cupsd restart

HL-3180CDW media-gfx/brother-hl3180cdw-bin from brother-overlay Works! Works! Filter to copy is at /opt/brother/Printers/mfc9320cw/lpd/filtermfc9320cw. Scanner config command is brsaneconfig4.
MFC-J6510DW Official Brother-mfc6510dw RPM Drivers Works! not tested No remark
QL-700 Official Brother ql700pdrv-3.1.5-0.i386.rpm rpm drivers Works! Connected by USB. See Gentoo forum thread regarding installation
MFC-L2710DN Official Brother-MFC-L2710DN RPM Drivers Works! Works! Installation of Avahi and sudo were needed Network Connected. Drivers installed from *.rpm package using guide herein. Before running #rpm -i the archive was unpacked using #rpm2tar command and then investigated with #tree in order to identify which folders should be created in advance. To complete installation of scanner run $brsaneconfig4
MFC-L2712DN net-print/brother-genml1-bin from brother-overlay Works! Works! To add scanner, run brsaneconfig4, works like a charm with Plasma Skanlite. For CUPS printing you will need Avahi running and change printer hostname to end with .local - ie. BRNB422000E9552.local
MFC-L2750DW driverless Works! Works! Connected via network. OSS (driverless) provides (limited) basic support:

- Printing: Use cups IPP Everywhere builtin driver. Printing works in apps, including duplex. From IPP attr, as seen in ipptool, it is unclear if optimum resolution (HW spec: max 1200dpi) is used because "pwg-raster-document-resolution-supported" only provides "600dpi", while attr "printer-resolution-supported" lists up to "1200dpi". Actual resolution is not visible in print dialog, where only Q levels Draft/Normal/High are listed! From inspecting IPP attr list, IPP 2.0 is published and raster format seem to be mainly supported (no PDF format, no full IPP Everywhere/yet?).

- Scanning: A) Use media-gfx/sane-airscan. Scanning works e.g. in skanlite. Unfortunately, only up to 600dpi seem to be published via eSCL protocol (and only max 300dpi with WSD protocol), as seen in airscan trace log of capability XML. Official HW spec states max 1200dpi for flatbed, max 600dpi for ADF. So maximum HW supported dpi is not available in scanner option dialog. B) Use core package media-gfx/sane-backends with "SANE_BACKENDS: escl". Also works. Obviously using eSCL protocol too, and therefore with same restrictions (max resolution etc).

- Fax sending: Should likely also be possible in future via OpenPrinting "IPP Fax out" support soon (very similar to printing, but with additional phone number as IPP attr).

MFC-L2750DW Proprietary/binary:


- Printer: Official Brother-MFC-L2750DW RPM Drivers 4.0.0 (no readymade ebuild known yet)

- Scanner: media-gfx/brscan4

Works! Works! - Printing: Arch Linux has dedicated RPM package of proprietary printer driver. No ebuild prepared+tested yet. After manual installation, printing also works: Dpi selection up to 1200dpi (with two flavors "HQ1200"=2400x600, "1200dpi") possible in printer settings -- with only subtle differences for text prints in comparison to printout of IPP driverless. Also additional options for Secure Print and Toner Save are shown.



- Scanning: After installation of brscan4, scanning also works e.g. in skanlite: Higher dpis up to 9600dpi can be selected (obviously also interpolated when exceeding HW spec limit). Note that even brscan5 works with the scanner. In addition to brscan4, it seems to offer dedicated scanner specific option ("Auto deskew"). Obviously, brscan5 is using a more advanced binary protocol than brscan4, for scanners supporting this. However, for brscan5 no official ebuild is known yet.

Assumption: Proprietary drivers might use other protocol, e.g. send binary PCL or BRScript3 stream (instead of regular PWG raster format) to facilitate features like higher res that are not published via IPP attr. May need analysis of network stream. Features of "driverless" open source universal IPP driver (see above) may often suffice though if closed source driver shall be avoided.

Prerequisites

cups

Make sure net-print/cups is installed:

root #emerge --ask net-print/cups

The cups service must be started before the driver(s) can be installed.

OpenRC

If OpenRC is used, then the following command can be issued to start the cups service.

root #/etc/init.d/cupsd start

To have it started automatically at boot time, use rc-update:

root #rc-update add cupsd default
Systemd

If systemd is used, then the following command can be issued to start the cups service.

root #systemctl start cups.service

To have it started automatically at boot time, invoke the following:

root #systemctl enable cups.service

Installing the drivers

driverless

CUPS printer drivers and backends are deprecated and will no longer be supported in a future feature release of CUPS.
For how to go without printer drivers see driverless printing

net-print/gutenprint

A third-party driver with a number of Brother printers supported and several other brands as well.

root #emerge --ask net-print/gutenprint[ppds]

Proceed with Installing the printer.

net-print/brlaser

A third-party printer driver supporting a wide range of Brother printers is net-print/brlaser.

root #emerge --ask net-print/brlaser

Proceed with Installing the printer.

Using drivers from ebuild repositories

For printers not supported by net-print/brlaser and if the printer is supported by an ebuild in the brother-overlay ebuild repository or some other ebuild repository, the ebuild should be used, as it usually contains all the prerequisites mentioned here. It would allow to skip the section "Alternative: rpm installation".

To enable an ebuild repository, create the proper repos.conf file and emaint sync it as shown here for the brother-overlay ebuild repository:

root #eselect repository enable brother-overlay
root #emaint sync -r brother-overlay && eix-update

Since this ebuild repository uses sync-type = git the package dev-vcs/git needs to be installed. Alternatively, either eselect repository can be used for adding the repository.

From the ebuild repository, install the driver as shown here for Brother's Generic LPR and CUPSwrapper printer driver from the brother-overlay ebuild repository.

root #emerge --ask net-print/brother-genml1-bin

brother-genml1-bin contains the Generic printer drivers as offered on support.brother.com for a wide range of compatible models (click the Compatible Model link on BrGenML1 Compatible Models):

  • Generic LPR printer driver (rpm package) (contains ELF 32-bit LSB executables)
  • Generic CUPSwrapper printer driver (rpm package)

The ppd file installed is brother-BrGenML1-cups-en.ppd and the make and model is Brother BrGenML1 for CUPS.

user $/usr/sbin/lpinfo -m | grep -i brother
brother-BrGenML1-cups-en.ppd Brother BrGenML1 for CUPS

Alternative: rpm installation

As the drivers are available from Brother in the form of an .rpm file, the app-arch/rpm package needs to be installed.

root #emerge --ask app-arch/rpm

Missing directories

Please create these directories up front; it will save a lot of trouble later:

root # mkdir -p /var/spool/lpd
root # mkdir -p /usr/lib64/cups/filter

Downloading the driver from Brother

The drivers for Brother printers are available at Brother solutions' web page.

Search for the correct model name by following the directions given by the pages.

After having chosen the right model, four drivers will be presented for download. Please download the two ones ending in .rpm for LPR driver and cupswrapper driver.

Installing the drivers

Installing the drivers may be a multiple-step process as some needed directories may appear missing on the system.

To install a driver change to the directory where the downloaded .rpm files are located.

Next, issue the following command to see the filenames:

root #ls -a 
.  ..  dcp750cwcupswrapper-1.0.1-1.i386.rpm  dcp750cwlpr-1.0.1-1.i386.rpm

Of course the driver names may change according to the model's name. The output of the previous command can be used to copy and paste the filenames in the rpm command to avoid typos when entering them.

First install the LPR driver.

root #rpm -i --nodeps dcp750cwlpr-1.0.1-1.i386.rpm

The installation may give some warnings, telling that some directories are missing. In this case, add the missing directories by hand and re-install the driver with this command:

root #rpm -i --nodeps --replacepkgs dcp750cwlpr-1.0.1-1.i386.rpm

Next install the cupswrapper driver the same way:

root #rpm -i --nodeps dcp750cwcupswrapper-1.0.1-1.i386.rpm

Again, the installation may give some warnings, telling that some directories are missing. Try to add the missing directories by hand and re-install the driver with this command:

root #rpm -i --nodeps --replacepkgs dcp750cwcupswrapper-1.0.1-1.i386.rpm
Note
Do not forget the --replacepkgs option to force the re-installation of all the necessary files.

Copying the filter at the right place

Copy the filter to the right place with the following command:

Note
Have a look at the feedback table at the top of this page to know more about the filter's name.
root #cp /usr/lib64/cups/filter/brlpdwrapperdcp750cw /usr/libexec/cups/filter/

Note that for some printers (such as MFC-L3650CDW), it is important to copy this as a symlink, otherwise printing will not work. This can be done by adding --preserve to the cp command.

Installing the printer

Connect the printer to the network

Connect the printer to the network as described in the network section of the printer model's Online User Guide. From this step, the printer's network address can be obtained which is needed for CUPS in the next step. When pointing the browser to the printer's network address it will go to the printer's user interface.

Networked printer detection

CUPS is capable of automatically detecting networked printers. In case it does not work it might be blocked by a firewall. As a workaround, temporarily connect the printer to the computer.

Use CUPS' web interface to install the printer

Using CUPS' web interface http://localhost:631/admin is quite self-explanatory. The Add Printer button will list the networked printer(s) starting at the Discovered Network Printers line.

Use command line to install the printer

The lpinfo command can be used in order to list all connected printers:

root #lpinfo -v
network ipp
network http
network socket
network https
network ipps
network lpd
network lpd://BRW67890ABCDEF/BINARY_P1

Running lpinfo -l -v will give a more verbose output.


Add the printer with lpadmin using device uri and ppd file:

root #lpadmin -p Brother_HL-L2340DW -E -v lpd://BRW67890ABCDEF/BINARY_P1 -m brother-BrGenML1-cups-en.ppd

In case of net-print/brlaser, the ppd files can be found in /usr/share/cups/drv/brlaser.drv.

user $lpinfo -m
lsb/usr/cupsfilters/Fuji_Xerox-DocuPrint_CM305_df-PDF.ppd Fuji Xerox
drv:///brlaser.drv/br1510.ppd Brother DCP-1510 series, using brlaser v6
drv:///brlaser.drv/br1600.ppd Brother DCP-1600 series, using brlaser v6
drv:///brlaser.drv/br7030.ppd Brother DCP-7030, using brlaser v6
drv:///brlaser.drv/br7040.ppd Brother DCP-7040, using brlaser v6
drv:///brlaser.drv/br7055.ppd Brother DCP-7055, using brlaser v6
drv:///brlaser.drv/br7055w.ppd Brother DCP-7055W, using brlaser v6
drv:///brlaser.drv/br7060d.ppd Brother DCP-7060D, using brlaser v6
drv:///brlaser.drv/br7065dn.ppd Brother DCP-7065DN, using brlaser v6
drv:///brlaser.drv/br7080.ppd Brother DCP-7080, using brlaser v6
drv:///brlaser.drv/br7080d.ppd Brother DCP-7080D, using brlaser v6
drv:///brlaser.drv/brl2500d.ppd Brother DCP-L2500D series, using brlaser v6
drv:///brlaser.drv/brl2520d.ppd Brother DCP-L2520D series, using brlaser v6
drv:///brlaser.drv/brl2540.ppd Brother DCP-L2540DW series, using brlaser v6
drv:///brlaser.drv/br1110.ppd Brother HL-1110 series, using brlaser v6
drv:///brlaser.drv/br1200.ppd Brother HL-1200 series, using brlaser v6
drv:///brlaser.drv/br2030.ppd Brother HL-2030 series, using brlaser v6
drv:///brlaser.drv/br2140.ppd Brother HL-2140 series, using brlaser v6
drv:///brlaser.drv/br2220.ppd Brother HL-2220 series, using brlaser v6
drv:///brlaser.drv/br2270dw.ppd Brother HL-2270DW series, using brlaser v6
drv:///brlaser.drv/br5030.ppd Brother HL-5030 series, using brlaser v6
drv:///brlaser.drv/brl2300d.ppd Brother HL-L2300D series, using brlaser v6
drv:///brlaser.drv/brl2320d.ppd Brother HL-L2320D series, using brlaser v6
drv:///brlaser.drv/brl2340d.ppd Brother HL-L2340D series, using brlaser v6
drv:///brlaser.drv/brl2360d.ppd Brother HL-L2360D series, using brlaser v6
drv:///brlaser.drv/br1910w.ppd Brother MFC-1910W, using brlaser v6
drv:///brlaser.drv/br7240.ppd Brother MFC-7240, using brlaser v6
drv:///brlaser.drv/br7360n.ppd Brother MFC-7360N, using brlaser v6
drv:///brlaser.drv/br7365dn.ppd Brother MFC-7365DN, using brlaser v6
drv:///brlaser.drv/brl2710.ppd Brother MFC-L2710DW series, using brlaser v6
drv:///sample.drv/dymo.ppd Dymo Label Printer
drv:///sample.drv/epson9.ppd Epson 9-Pin Series
drv:///sample.drv/epson24.ppd Epson 24-Pin Series
drv:///generic-brf.drv/gen-brf.ppd Generic Braille embosser, 1.0
drv:///cupsfilters.drv/pwgrast.ppd Generic IPP Everywhere Printer
drv:///sample.drv/generpcl.ppd Generic PCL Laser Printer
lsb/usr/cupsfilters/Generic-PDF_Printer-PDF.ppd Generic PDF Printer

In this case the -m option to lpadmin should use the drv:///brlaser.drv/... entry as shown below as an example for Brother HL-L2340DW:

root #lpadmin -p Brother_HL-L2340DW -E -v lpd://BRW67890ABCDEF/BINARY_P1 -m drv:///brlaser.drv/brl2340d.ppd

For further options see man 8 lpadmin.

Check the setup with lpstat:

user $lpstat -d -l -t
no system default destination
scheduler is running
no system default destination
device for Brother_HL-L2340DW: lpd://BRW1008B1372DF2/BINARY_P1
Brother_HL-L2340DW accepting requests since Fri 30 Oct 2015 05:36:25 PM CET
printer Brother_HL-L2340DW is idle.  enabled since Fri 30 Oct 2015 05:36:25 PM CET
        Form mounted:
        Content types: any
        Printer types: unknown
        Description: Brother_HL-L2340DW
        Alerts: none
        Location: 
        Connection: direct
        Interface: /etc/cups/ppd/Brother_HL-L2340DW.ppd
        On fault: no alert
        After fault: continue
        Users allowed:
                (all)
        Forms allowed:
                (none)
        Banner required
        Charset sets:
                (none)
        Default pitch:
        Default page size:
        Default port settings:

Don't forget to set the user's default printer

user $lpstat -a
Brother_HL-L2340D_series accepting requests since Fri 29 May 2015 09:11:30 AM CEST
user $lpoptions -d Brother_HL-L2340D_series
copies=1 device-uri=http://192.168.178.27:631/ipp/port1 finishings=3 job-cancel-after=10800 job-hold-until=no-hold job-priority=50 job-sheets=none,none marker-change-time=1432883490 marker-colors=#000000,none marker-high-levels=100 marker-levels=-1,95 marker-low-levels=16 marker-names='Black\ Toner\ Cartridge,Drum\ Unit' marker-types=toner number-up=1 printer-commands=AutoConfigure,Clean,PrintSelfTestPage printer-info='Brother HL-L2340D series' printer-is-accepting-jobs=true printer-is-shared=false printer-location='Local Printer' printer-make-and-model='Brother BrGenML1 for CUPS ' printer-state=3 printer-state-change-time=1432883490 printer-state-reasons=none printer-type=10522644 printer-uri-supported=ipp://localhost/printers/Brother_HL-L2340D_series

Installing the scanner

Prerequisites

Make sure the media-gfx/sane-backends package is installed in order to install the driver for the scanner. As most users will use xsane to scan a document, just emerge it. The media-gfx/sane-backends package will be pulled in as a dependency.

root #emerge --ask media-gfx/xsane

Installing the driver

Some of Brother scanners are supported by media-gfx/sane-airscan package. This is an open source "universal vendor-neutral" driver and allows accessing IPP scanners via either of eSCL or WSD protocol. See the homepage of the package for list of scanners which were reported to work. Scope of feature support (e.g. resolution) depends on set of IPP attributes published by the scanner.

Some of Brother scanners are supported by media-gfx/sane-backends package, by selecting the "escl" backend. This open source driver is also using eSCL protocol, like "sane-airscan". Therefore it seems to show comparable limitations (e.g. maximum resolution). From code, it look as if it supports also PDF format in addition to JPEG format (both mandatory for eSCL/2.0 scanners). See sane issue discussion thread for an ongoing discussion of differences between "builtin escl" and "sane-airscan": https://gitlab.com/sane-project/backends/-/issues/202

Some of Brother scanners are supported by media-gfx/brscan4 package. This contains the proprietary binary Brother scanner driver. That can also be installed manually as rpm (see below). This driver does not seem to use eSCL, but accesses e.g. printer TCP port 54921 with some simple proprietary protocol for selecting configuration. Therefore, it is often able to allow higher resolutions.

Brother also seems to offer a newer proprietary brscan5 driver (no Gentoo package known yet, bug #833603). At least for some scanners, brscan5 seems to provide additional specific options (e.g. "auto deskew"). Obviously, brscan5 optionally uses more advanced protocol, still on same TCP port 54921, at least for scanners supporting this. However, details (e.g. differences in feature set, device backward compatibility) are unknown.

Finally, there are/were also ongoing efforts (e.g. github repositories) for open source driver using the proprietary port 54921 protocol. As those are unfinished and may have legal problem that the license of at least some proprietary driver versions may disallow traffic reverse engineering, it is not worth to try those out as of now.

Alternative: rpm installation

Download the driver from the Brother Solutions's download page for the scanner.

Important
Pay attention to the family the printer belongs to. Depending on the family, the right brscan will need to be selected (brscan, brscan2, brscan3) as well as the right architecture (32 bits or 64 bits depending on the system installation).

Change to the directory where the downloaded drivers are, and run the following command:

root #ls -a

This will show the file names of the downloaded files, allowing for easy copy/paste for the next commands.

Install the drivers using rpm:

root #rpm -i --nodeps brscan2-0.2.5-1.x86_64.rpm
Note
If xsane was not installed yet, install it, then add --replacepkgs as an option to the previous command to reinstall the driver.

Configuring the scanner for network access

Note
This step can be skipped if only local scanning via USB is needed. The necessary drivers are already installed through the brscan RPM package.

Once the driver is correctly installed, use the following command:

root #brsaneconfig2 -a name=monScanner model=DCP-750CW ip=192.168.1.13
Note
brsaneconfig2 should be replaced with the command corresponding to the printer's family (see above), monScanner with any name of personal choice, and DCP-750CW with the printer's model name.

Now check everything is correctly installed:

root #brsaneconfig2 -q | grep monScanner
  0 monScanner          "DCP-750CW"         I:192.168.1.13
Note
Replace monScanner with the name chosen above.

Congratulation! The scanner is now ready for use!

Troubleshooting

Generic LPR printer driver on amd64 no-multilib

The printer driver uses statically compiled x86 32-bit binaries. To be able to execute them the kernel needs to have the following configuration enabled: IA32_EMULATION.

Further, the binaries from Brother (rawtobr3 and brprintconflsr3) require two 32-bit glibc library files in order to be executed on a 64-bit system. These can be compiled by the user, or — even easier — obtain a pre-compiled version (glibc i686) from rpmfind.net or similar site.

To accomplish the latter, first install the rpm utilities:

root #emerge rpm

Next, create a /usr/local/lib32 directory if it doesn't exist:

root #mkdir /usr/local/lib32

Move the downloaded rpm file into a temporary directory and convert to a simpler tar file:

root #rpm2tar glibc-2.25-12.fc26.i686.rpm

Extract the tar file in the temporary directory:

root #tar -xvf glibc-2.25-12.fc26.i686.tar

A lib/ subdirectory should be created containing the libraries. Copy them to the /usr/local/lib32 directory on the system.

root #cp lib/* /usr/local/lib32

Under /usr/local/lib32, only the libc.so.6 file is needed, but since there may be symlinks, it's easier to copy them all. Run the 'file' command on libc.so.6 to ensure it is an ELF 32-bit format. If not, install the correct version:

root #file /usr/local/lib32/libc.so.6

Finally, copy ld-linux.so.2 into the main /usr/local/lib directory.

root #cp /usr/local/lib32/ld-linux.so.2 /usr/local/lib

Two perl wrapper/filter scripts that are provided with the Brother drivers need to be changed as well to instruct these binaries to load the 32-bit libraries, not the default 64-bit ones. First, locate and edit the two files (replace YOURPRINTER with the printer name provided during the Brother installation script execution):

root #nano filter_YOURPRINTER
root #nano brother_lpdwrapper_YOURPRINTER

For instance, for the MFCL2680W printer:

root #nano /opt/brother/Printers/MFCL2680W/lpd/filter_MFCL2680W
root #nano /opt/brother/Printers/MFCL2680W/cupswrapper/brother_lpdwrapper_MFCL2680W

At the top of each file, below the comment header, add the following line:

CODE Use 32-bit libraries in filter and wrapper scripts
$ENV{LD_LIBRARY_PATH} = "/usr/local/lib32";

This sets the default library path before the scripts execute the binaries. rawtobr3 processes the print data and brprintconflsr3 processes the page formatting data. Once all of these instructions have been successfully performed, the printer should work as intended!

Text shifted up

Sometimes it happens that the text is shifted up toward the upper border of the page.

To correct this, enter the following command:

root # brprintconf_dcp750cw -pt A4

Scanner not detected

It may happen that, when xsane is launched, the scanner is not detected. This is probably due to a too recent version of libusb. In order to solve this, it might be necessary to install dev-libs/libusb-compat.

root #emerge --ask dev-libs/libusb-compat

Contrary to what the name suggests, this may even be required if the scanner is used over the network. It is known to be required for these models even when they are used over the network instead of through a direct USB connection:

  • DCP-1610WE
  • MFC-9120CN
  • MFC-9142CDN

External resources

Retrieved from "https://wiki.gentoo.org/index.php?title=Brother_networked_printer/en&oldid=1296045"