Dm-crypt
dm-crypt ist ein Verschlüsselungssystem welches das crypto-API-Framework und das device-mapper Subsystem des Kernels nutzt. Mit dm-crypt können Administratoren sowohl ganze Laufwerke, logische Datenträger oder Partitionen als auch einzelne Dateien verschlüsseln.
The dm-crypt subsystem supports the Linux Unified Key Setup (LUKS) structure, which allows for multiple keys to access the encrypted data, as well as manipulate the keys (such as changing the keys, adding additional passphrases, etc.) Although dm-crypt supports non-LUKS setups as well, this article will focus on the LUKS functionality mostly due to its flexibility, manageability as well as broad support in the community.
Konfiguration
Folgende zwei Voraussetzungen müssen erfüllt sein, bevor man dm-crypt benutzen kann:
- Configuration of the Linux kernel
- Installation of the sys-fs/cryptsetup package
Konfiguration des Kernels
Um dm-crypt zu verwenden, müssen einige Konfigurationsoptionen zwingend gesetzt sein.
Zu allererst muss die Unterstützung für die "device mapper" Infrastruktur und für das "crypt target" aktiviert werden.
[*] Enable loadable module support
Device Drivers --->
[*] Multiple devices driver support (RAID and LVM) --->
<*> Device mapper support
<*> Crypt target support
Next, the Linux kernel needs to support the set of cryptographic APIs that the administrator wants to use for encryption. These can be found under the Cryptographic API section:
[*] Cryptographic API --->
<*> XTS support
<*> SHA224 and SHA256 digest algorithm
<*> AES cipher algorithms
<*> AES cipher algorithms (x86_64)
<*> User-space interface for hash algorithms
<*> User-space interface for symmetric key cipher algorithms
If the root file system will be encrypted as well, then an initial ram file system needs to be created in which the root filesystem is decrypted before it is mounted. Thus this requires initramfs support as well:
General setup --->
[*] Initial RAM filesystem and RAM disk (initramfs/initrd) support
If using the tcrypt encryption option (TrueCrypt/tcplay/VeraCrypt compatibility mode), then the following items will also need to be added to the kernel. Otherwise, cryptsetup will return the following errors: "device-mapper: reload ioctl failed: Invalid argument" and "Kernel doesn't support TCRYPT compatible mapping".
Device Drivers --->
[*] Block Devices --->
<*> Loopback device support
File systems --->
<*> FUSE (Filesystem in Userspace) support
[*] Cryptographic API --->
<*> RIPEMD-160 digest algorithm
<*> SHA384 and SHA512 digest algorithms
<*> Whirlpool digest algorithms
<*> LRW support
<*> Serpent cipher algorithm
<*> Twofish cipher algorithm
Cryptsetup installation
The sys-fs/cryptsetup package provides the cryptsetup command, which is used to open or close the encrypted storage as well as manage the passphrases or keys associated with it.
root #emerge --ask sys-fs/cryptsetupEncrypted storage
Benchmark
cryptsetup provides a benchmarking tool which will help to decide which setup to choose. The output depends on kernel settings as well as USE flags and destination (HDD, SSD etc.).
root #cryptsetup benchmark# Tests are approximate using memory only (no storage IO).
PBKDF2-sha1 1707778 iterations per second for 256-bit key
PBKDF2-sha256 2131252 iterations per second for 256-bit key
PBKDF2-sha512 1630755 iterations per second for 256-bit key
PBKDF2-ripemd160 882639 iterations per second for 256-bit key
PBKDF2-whirlpool 664496 iterations per second for 256-bit key
argon2i 9 iterations, 1048576 memory, 4 parallel threads (CPUs) for 256-bit key (requested 2000 ms time)
argon2id 9 iterations, 1048576 memory, 4 parallel threads (CPUs) for 256-bit key (requested 2000 ms time)
# Algorithm | Key | Encryption | Decryption
aes-cbc 128b 1197.2 MiB/s 3788.1 MiB/s
serpent-cbc 128b N/A N/A
twofish-cbc 128b N/A N/A
aes-cbc 256b 888.2 MiB/s 3011.1 MiB/s
serpent-cbc 256b N/A N/A
twofish-cbc 256b N/A N/A
aes-xts 256b 3670.7 MiB/s 3708.4 MiB/s
serpent-xts 256b N/A N/A
twofish-xts 256b N/A N/A
aes-xts 512b 2929.2 MiB/s 2974.0 MiB/s
serpent-xts 512b N/A N/A
twofish-xts 512b N/A N/A
Keyfile or passphrase
In order to start with encrypted storage, the administrator will need to decide which method to use for the encryption key. With cryptsetup the choice is either a passphrase or a keyfile. In case of a keyfile, this can be any file, but it is recommended to use a file with random data which is properly protected (considering that access to this keyfile will mean access to the encrypted data).
To create a keyfile, one can use the dd command:
root #dd if=/dev/urandom of=/etc/keys/enc.key bs=1 count=4096In the next sections, we will show every command for both situations - passphrase and keyfile. Of course, only one method is necessary.
Creating an encrypted storage platform
In order to create an encrypted storage platform (which can be a disk, partition, file, ...) use the cryptsetup command with the luksFormat action.
For instance, to have /dev/vdb2 as the storage medium for the encrypted data:
root #cryptsetup -c aes-xts-plain64 -s 512 -y luksFormat /dev/vdb2This will overwrite data on /dev/vdb2 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: ... Verify passphrase: ...
To use a keyfile instead of a passphrase:
root #cryptsetup -c aes-xts-plain64 -s 512 -y luksFormat /dev/vdb2 /etc/keys/enc.keyThis will overwrite data on /dev/vdb2 irrevocably. Are you sure? (Type uppercase yes): YES
The -c aes-xts-plain64 tells cryptsetup the cipher used to encrypt the disk (cat /proc/crypto will show you all possibilities). -s 512 tells cryptsetup which keylength to use for the real encryption key (unlike the passphrase or keyfile, which are used to access this real encryption key). Finally -y forces you to type your password twice.
XTS splits the key into two halves, only one being used for the actual encryption. That means "aes-xts" with a 512-bit key actually uses 256 bits for the AES part.
If the LUKS header gets damaged, your encrypted data will be lost forever, even if you have a backup of the GPG key and passphrase. Therefore, you may wish to consider backing up this header to a separate device, and storing it securely. See the LUKS FAQ for more details on how to do this.
root #cryptsetup luksHeaderBackup /dev/sdXn --header-backup-file /tmp/efiboot/luks-header.imgFull disk encryption booting
To boot from a fully encrypted device (including encrypted /boot) using GRUB, encrypt using luks1, since luks2 isn't fully supported yet. Example command:
root #cryptsetup -c aes-xts-plain64 -s 512 -y luksFormat --type luks1 /dev/vdb2Opening the encrypted storage
In order to open up the encrypted storage (i.e. make the real data accessible through transparent decryption), use the luksOpen action.
root #cryptsetup luksOpen /dev/vdb2 mynameEnter passphrase for /dev/vdb2: ...
If a keyfile is used, then the command would look like so:
root #cryptsetup luksOpen -d /etc/keys/enc.key /dev/vdb2 mynameWhen the command finishes successfully, then a new device file called /dev/mapper/myname will be made available.
If this is the first time this encrypted device is used, it needs to be formatted. The following example uses the Btrfs file system but of course any other file system will do:
root #mkfs.btrfs /dev/mapper/mynameOnce the file system is formatted, or the formatting was already done in the past, then the device file can be mounted on the system:
root #mount /dev/mapper/myname /homeClosing the encrypted storage
In order to close the encrypted storage (i.e. ensure that the real data is no longer accessible through transparent decryption), use the luksClose action:
root #cryptsetup luksClose mynameOf course, make sure that the device is no longer in use.
Manipulating LUKS keys
LUKS keys are used to access the real encryption key. They are stored in slots in the header of the (encrypted) partition, disk or file.
Listing the slots
With the luksDump action, information about the encrypted partition, disk or file can be shown. This includes the slots:
root #cryptsetup luksDump /dev/vdb2LUKS header information for /dev/vdb2
Version: 1
Cipher name: aes
Cipher mode: xts-plain64
Hash spec: sha1
Payload offset: 4096
MK bits: 512
MK digest: 34 3b ec ac 10 af 19 e7 e2 d4 c8 90 eb a8 da 3c e4 4f 2e ce
MK salt: ff 7c 7f 53 db 53 48 02 a4 32 dc e0 22 fc a3 51
06 ba b3 48 b3 28 13 a8 7a 68 43 d6 46 79 14 fe
MK iterations: 59375
UUID: 2921a7c9-7ccb-4300-92f4-38160804e08c
Key Slot 0: ENABLED
Iterations: 241053
Salt: 90 0f 0f db cf 66 ea a9 6c 7c 0c 0d b0 28 05 2f
8a 5c 14 54 98 62 1a 29 f3 08 25 0c ec c2 b1 68
Key material offset: 8
AF stripes: 4000
Key Slot 1: ENABLED
Iterations: 273211
Salt: 01 4c 26 ed ff 18 75 31 b9 89 5d a6 e0 b5 f4 14
48 d0 23 47 a9 85 78 fb 76 c4 a9 d0 cd 63 fb d7
Key material offset: 512
AF stripes: 4000
Key Slot 2: DISABLED
Key Slot 3: DISABLED
Key Slot 4: DISABLED
Key Slot 5: DISABLED
Key Slot 6: DISABLED
Key Slot 7: DISABLED
In the above example, two slots are used. Note that luksDump does not give away anything sensitive - it is merely displaying the LUKS header content. No decryption key has to be provided in order to call luksDump.
Adding a keyfile or passphrase
In order to add an additional keyfile or passphrase to access the encrypted storage, use the luksAddKey action:
root #cryptsetup luksAddKey /dev/vdb2Enter any passphrase: (Enter a valid, previously used passphrase to unlock the key) Enter new passphrase for key slot: ... Verify passphrase: ...
To use a keyfile to unlock the key (but still add in a passphrase):
root #cryptsetup luksAddKey -d /etc/keys/enc.key /dev/vdb2Enter new passphrase for key slot: ... Verify passphrase: '''
If a keyfile is to be added (say /etc/keys/backup.key):
root #cryptsetup luksAddKey /dev/vdb2 /etc/keys/backup.keyOr, to use the first keyfile to unlock the main key:
root #cryptsetup luksAddKey -d /etc/keys/enc.key /dev/vdb2 /etc/keys/backup.keyRemoving a keyfile or passphrase
With the luksRemoveKey action, a keyfile or passphrase can be removed (so they can no longer be used to decrypt the storage):
root #cryptsetup luksRemoveKey /dev/vdb2Enter LUKS passphrase to be deleted: ...
Or to remove a keyfile:
root #cryptsetup luksRemoveKey -d /etc/keys/backup.key /dev/vdb2Make sure that at least one method for accessing the data is still available. Once a passphrase or keyfile is removed for use, this cannot be recovered again.
Emptying a slot
Suppose the passphrase or keyfile is no longer known, then the slot can be freed. Of course, this does require prior knowledge of which slot that the passphrase or keyfile was stored in.
For instance, to empty out slot 2 (which is the third slot as slots are numbered starting from 0):
root #cryptsetup luksKillSlot /dev/vdb2 2This command will ask for a valid passphrase before continuing. Or one can pass on the keyfile to use:
root #cryptsetup luksKillSlot -d /etc/keys/enc.key /dev/vdb2 2Automate mounting encrypted file systems
Until now, the article focused on manual setup and mounting/unmounting of encrypted file systems. An init service dmcrypt exists which automates the decrypting and mounting of encrypted file systems.
Configuring dm-crypt
Edit the /etc/conf.d/dmcrypt file and add in entries for each file system. The supported entries are well documented in the file, the below example is just that - an example:
/etc/conf.d/dmcryptAutomatically enabling two encrypted file systems# Definition for /dev/mapper/home (for /home)
target=home
source=UUID="abcdef12-321a-a324-a88c-cac412befd98"
key=/etc/keys/home.key
# If trim is desired, it can be enabled as below.
# Keep in mind that trim is not enabled by default for a security reason.
# This configuration is optional, otherwise default options apply.
options="--allow-discards"
# Definition for /dev/mapper/local (for /usr/local)
target=local
source=UUID="fedcba34-4823-b423-a94c-cadbefda2943"
key=/etc/keys/local.key
# Using an encrypted partition as key source.
target=other
source=UUID="ff24303e-49e1-4d13-b8ad-fc6b7e1d8174"
key=/keys/other.key # Relative to the root of the encrypted partition.
remdev=/dev/mapper/home # The recently decrypted partition.
# An empty line is important at the end of the file
If using passphrase instead of a keyfile, you'll be prompted for it on boot (given a simple target and source configuration).
Fstab konfigurieren
The next step is to configure /etc/fstab to automatically mount the (decrypted) file systems when they become available. It is recommended to first obtain the UUID of the decrypted (mounted) file system:
root #blkid /dev/mapper/home/dev/mapper/home: UUID="4321421a-4321-a6c9-de52-ba6421efab76" TYPE="ext4"
Then, update the /etc/fstab file accordingly:
/etc/fstabAutomatisches Einhängen der entschlüsselten DateisystemeUUID="4321421a-4321-a6c9-de52-ba6421efab76" /home ext4 defaults 0 0
UUID="bdef2432-3bd1-4ab4-523d-badcf234a342" /usr/local ext4 defaults 0 0
Add initscript to bootlevel
Don't forget to have the dmcrypt init service launched at boot:
root #rc-update add dmcrypt boot
Make decrypted device nodes visible
If you have decrypted/unlocked a device before the services were started for example your root disk in an with an initramfs then it's possible that the mapped device is not visible. In this case you can run the following to recreate it.
root #dmsetup mknodesMounting TrueCrypt/tcplay/VeraCrypt volumes
root #cryptsetup --type tcrypt open container-to-mount container-nameReplace container-to-mount with the device file under /dev or the path to the file you wish to open. Upon successful opening, the plaintext device will appear as /dev/mapper/container-name, which you can mount like any normal device.
If you are using key files, supply them using the --key-file option, to open a hidden volume, supply the --tcrypt-hidden option and for a partition or whole drive that is encrypted in system mode use the --tcrypt-system option.
When done, unmount the volume, and close the container using the following command:
root #cryptsetup close container-nameSiehe auch
- Dm-crypt full disk encryption — a guide which covers the process of configuring a drive to be encrypted using LUKS and btrfs.
- User:Sakaki/Sakaki's EFI Install Guide/Preparing the LUKS-LVM Filesystem and Boot USB Key
Externe Ressourcen
- Die cryptsetup FAQ, die auf GitLab gehostet wird, deckt ein breites Spektrum häufig gestellter Fragen ab.