Genesi Efika MX
From Gentoo Wiki
Little-endian ARMv7-A from Genesi US.
Documentation
The Genesi USA Efika MX Smarttop is supported on Gentoo, thanks to Genesi USA who provided us with hardware to bring this forward.
Genesi Efika MX specifications
Board specifications:
CODE
# Freescale i.MX51 SoC
# ARMv7-A 800MHz ARM Cortex-A8 processor
# 512MB DDR2 RAM
# 8GB SSD Flash
# Ralink RT3070USB Wireless card
# ASIX AX88772 USB 2.0 Ethernet card
# Soundcard
#
# 1x SDHC slot
# 2x USB 2.0 ports
# 1x HDMI out
# 1x Audio IN
# 1x Audio OUT
# 1x Ethernet 100Mbps
# Power button
#
# Board with serial and JTAG
/proc/cpuinfo
CPU info:
FILE
/proc/cpuinfoCode Listing 3.1: CPU Info
Processor : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 799.53
Features : swp half thumb fastmult vfp edsp
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc08
CPU revision : 1
Hardware : Genesi Efika MX
Revision : 51025
Serial : 0000000000000000
External resources
This page is based on a document formerly found on our main website gentoo.org.
The following people contributed to the original document: Mike Frysinger, Ned Ludd, Robin H. Johnson, Alex Tarkovsky, Alexey Shvetsov, Raúl Porcel, Joshua Saddler on April 28, 2013.
They are listed here because wiki history does not allow for any external attribution. If you edit the wiki article, please do not add yourself here; your contributions are recorded on each article's associated history page.