Handbook:IA64/Networking/Extending/pt-br

IA64 Manual
Installation
Sobre a instalação
Escolhendo a mídia
Configurando a rede
Preparando os discos
Instalando o stage3
Instalando o sistema base
Configurando o kernel
Configurando o sistema
Instalando as ferramentas
Configurando o gerenciador de boot
Finalizando
Trabalhando com o Gentoo
Introdução ao Portage
USE flags
Recursos do Portage
Sistema initscript
Variáveis de ambiente
Trabalhando com o portage
Arquivos e diretórios
Variáveis
Misturando ramos de software
Ferramentas adicionais
Árvore customizada do Portage
Recursos avançados
Configuração de rede
Iniciando
Configuração avançada
Uso de rede modular
Rede sem fio
Adicionando funcionalidade
Gerenciamento dinâmico

Standard function hooks

Four functions can be defined in /etc/conf.d/net:

• preup(), called before an interface is brought up;
• predown(), called before an interface is brought down;
• postup(), called after an interface is brought up; and
• postdown(), called after an interface is brought down.

Each of these these functions is called with the interface name, available within each function via the IFACE variable, so that one function can control multiple interfaces.

The return values for the preup() and predown() functions should be:

• 0 to indicate success, and that configuration or de-configuration of the interface can continue.
• A non-zero value otherwise.

If preup() returns a non-zero value, interface configuration will be aborted. If predown() returns a non-zero value, the interface will not be allowed to continue de-configuration.

Return values for the postup() and postdown() functions are ignored since there's nothing to do if they indicate failure.

${IFACE} é a interface sendo configurada ou desconfigurada. ${IFVAR} é ${IFACE} convertida para nome de variável permitida pelo bash.

FILE /etc/conf.d/netpre/post up/down function examples

preup() {
  # Test for link on the interface prior to bringing it up.  This
  # only works on some network adapters and requires the ethtool
  # package to be installed.
  if ethtool ${IFACE} | grep -q 'Link detected: no'; then
    ewarn "No link on ${IFACE}, aborting configuration"
    return 1
  fi
  
  # Remember to return 0 on success
  return 0
}
  
predown() {
  # The default in the script is to test for NFS root and disallow
  # downing interfaces in that case.  Note that if you specify a
  # predown() function you will override that logic.  Here it is, in
  # case you still want it...
  if is_net_fs /; then
    eerror "root filesystem is network mounted -- can't stop ${IFACE}"
    return 1
  fi
  
  # Remember to return 0 on success
  return 0
}
  
postup() {
  # This function could be used, for example, to register with a
  # dynamic DNS service.  Another possibility would be to
  # send/receive mail once the interface is brought up.
       return 0
}
  
postdown() {
  # This function is mostly here for completeness... I haven't
  # thought of anything nifty to do with it yet ;-)
  return 0
}

Nota
Para mais informações sobre escrever funções, por favor veja /usr/share/doc/netifrc-*/net.example.bz2.

Wireless function hooks

Nota
This will not work with WPA Supplicant - but the ${ESSID} and ${ESSIDVAR} variables are available in the postup() function.

Two functions can be defined in /etc/conf.d/net:

• preassociate(), called before association.
• postassociate(), called after association.

Each of these these functions is called with the interface name, available within each function via the IFACE variable, so that one function can control multiple interfaces.

The return values for the preassociate() function should be:

• 0 to indicate success, and to continue configuration.
• A non-zero value otherwise.

If preassociate() returns a non-zero value, interface configuration will be aborted.

O valor de retorno da função postassociate() é ignorado uma vez que não há nada a ser feito se ele indicar falha.

Within each function, the exact ESSID of the AP the system is connecting to is available via the ESSID variable. ${ESSIDVAR} is ${ESSID} converted to a variable name bash allows.

FILE /etc/conf.d/netpre/post association functions

preassociate() {
  # The below adds two configuration variables leap_user_ESSID
  # and leap_pass_ESSID. When they are both configured for the ESSID
  # being connected to then we run the CISCO LEAP script
  
  local user pass
  eval user=\"\$\{leap_user_${ESSIDVAR}\}\"
  eval pass=\"\$\{leap_pass_${ESSIDVAR}\}\"
  
  if [[ -n ${user} && -n ${pass} ]]; then
    if [[ ! -x /opt/cisco/bin/leapscript ]]; then
      eend "For LEAP support, please emerge net-misc/cisco-aironet-client-utils"
      return 1
    fi
    einfo "Waiting for LEAP Authentication on \"${ESSID//\\\\//}\""
    if /opt/cisco/bin/leapscript ${user} ${pass} | grep -q 'Login incorrect'; then
      ewarn "Login Failed for ${user}"
      return 1
    fi
  fi
  
  return 0
}
  
postassociate() {
  # This function is mostly here for completeness... I haven't
  # thought of anything nifty to do with it yet ;-)
  
  return 0
}

Nota
${ESSID} and ${ESSIDVAR} are unavailable in predown() and postdown() functions.

Nota
For more information on writing custom functions, please read /usr/share/doc/netifrc-*/net.example.bz2.

← Home →