Motion

Resources

Home

Package information

Wikipedia

Motion is a software package able to use cameras to detect motion.

It supports different camera types:

• Network cameras via RTSP, RTMP and HTTP
• V4L2 webcams
• Video capture cards
• Existing movie files

Once motion detects motion it can write picture files and/or movie files to a storage location.

Installation

Kernel

The linux kernel needs to be configured for V4L in case such cameras are being used.

KERNEL Enable support for V4L

Device Drivers --->
<M> Multimedia support  ---> 
    [*] Media Controller API
    [*] V4L2 sub-device userspace API
    [*] Media USB Adapters  ---> 
        <M> USB Video Class (UVC) 
        [*]   UVC input events device support
        <M> GSPCA based webcams  --->
            ** select the correct GSPCA camera, if any **
        ** select the correct USB camera, if any **
    [*] Media PCI Adapters  ---> 
        ** select the correct PCI camera devices, if any ***
    [*] V4L platform devices  --->
        ** select the correct V4L platform devices, if any **
    [*] Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends) 
[*] USB support  --->  
    <M> USB Gadget Support  ---> 
        <M> USB Gadget functions configurable through configfs
        <M> USB Webcam Gadget

USE flags

USE flags for media-video/motion A software motion detector

ffmpeg	Enable ffmpeg/libav-based audio/video codec support
mariadb	Add mariadb database support
mmal	Enables Multi-Media Abstraction Layer (MMAL) decoding support: Available e.g. on the Raspberry Pi.
mysql	Add mySQL Database support
postgres	Add support for the postgresql database
sqlite	Add support for sqlite - embedded sql database
v4l	Enable support for video4linux (using linux-headers or userspace libv4l libraries)
webp	Add support for the WebP image format

Data provided by the Gentoo Package Database · Last update: 2024-11-23 17:21 More information about USE flags

Emerge

Motion is in portage, emerge it as per normal:

root #emerge --ask --verbose media-video/motion

Configuration

After emerging sample configuration files are placed in /etc/motion:

root #ls /etc/motion

drwxr-xr-x 1 root root   390 Apr 10 15:14 .
drwxr-xr-x 1 root root  3616 Apr 10 13:31 ..
-rw-r--r-- 1 root root  2772 Apr  9 19:54 /etc/motion/camera1-dist.conf
-rw-r--r-- 1 root root  2771 Apr  9 19:54 /etc/motion/camera2-dist.conf
-rw-r--r-- 1 root root  2772 Apr  9 19:54 /etc/motion/camera3-dist.conf
-rw-r--r-- 1 root root  2772 Apr  9 19:54 /etc/motion/camera4-dist.conf
-rw-r--r-- 1 root root 27681 Apr  9 19:54 /etc/motion/motion-dist.conf

These configuration files are well documented, and can be used for creating the actual configuration files. The actual configuration files do not have "-dist" in their name. Note that simple renaming the files will not yield a working configuration. It may be better to create the configuration files from scratch, taking note of the individual settings needed for camera(s), and desired output options.

The structure of the configuration files is as follows:

• motion.conf: contains the general and daemon settings.
• camera#.conf contains the settings per camera.

Motion looks for the configuration files in the following order:

• in the current working directory
• in ~/.motion
• in /etc/motion

Note
Be aware that some of the configuration file parameters have been deprecated over time, e.g. the ffmpeg_bps parameter is now called movie_bps. Please refer to this table on the motion website for details.

An example working set of configuration files for two cameras, one laptop webcam and one IP-camera is as follows.

General settings:

FILE /etc/motion/motion.conf

log_level 5
webcontrol_port 8080
webcontrol_authentication <username:password>
webcontrol_parms 2
movie_output on
movie_codec mkv
movie_duplicate_frames false
target_dir /tmp/motion
output_pictures off
camera /etc/motion/camera1.conf
camera /etc/motion/camera2.conf

First camera, a webcam using V4L:

FILE /etc/motion/camera1.conf

camera_id = 1
camera_name = webcam
videodevice /dev/video0
stream_authentication <username:password>
stream_motion on
stream_maxrate 25
stream_localhost on

Second camera, an IP camera:

FILE /etc/motion/camera2.conf

camera_id = 2
camera_name = livingroom
netcam_userpass <username:password>
netcam_url rtsp://IP-ADDRESS/stream2
stream_authentication <username:password>
stream_motion on
stream_maxrate 25
stream_localhost on

Make sure to update credentials and the URL. Please refer to motion's documentation for further details for the configuration.

Optimization

Motion can be quite taxing on your hardware, especially if it is continuously receiving a stream of pictures, which it might need to process into video files, stream to client devices, and store somewhere on disk. It might be worth spending some time on optimization. With a modern the right optimization the system utilization could drop by as much 90%, YMMV depending on how hardware support there is available for the target system.

Video codec

Motion supports different codecs via the parameter movie_codec. Some considerations for the choice of codec might be:

• CPU load for the encoding: hardware acceleration might be configured to ease the load
• Amount of disk space needed for storing the videos: some codecs are more efficient then others
• Codec support on the devices that are used to view the video files: not all client devices support all codecs

Hardware acceleration

Various CPUs and GPUs have support for offloading the task of encoding videos. A choice should to be made, depending on the video codec, the type of CPU and GPU available.

Follow the instructions at GCC_optimization to at least set the proper march and the CPU_FLAGS. This will configure the system to use specific instructions that can optimize video encoding, e.g. instructions like SSSE3, SSE4.2, AVX, FMA3, BMI2, and AVX2.

Evaluate the following articles to establish the support for hardware acceleration:

• Intel CPUs:
  • Intel Quick Sync Video hardware support
  • GuC/HuC firmware
• AMD GPUs:
  • AMDGPU
  • AMD's Video Coding Engine
  • AMD's Video Core Next
• NVIDIA GPUs:
  • Nvidia's encode/decode support matrix

Motion uses media-video/ffmpeg for video encoding. Check ffmpeg's hardware acceleration for support.

Ffmpeg USE flags to consider include:

• opencl
• vaapi
• vdpau

Support for Intel's libmfx is currently lacking in Gentoo, see bug #590752 for details. Note that hardware acceleration might require additional linux kernel configuration.

Motion tuning parameters

Motion supports various configuration parameters which can be used for tuning purposes. These include:

• framerate
• movie_quality
• movie_passthrough

Play around with it to establish the optimum between quality and resource utilization

Usage

Commandline

Motion can be simply run from the commandline for testing purposes:

user $motion

[-1083001888:motion] [NTC] [ALL] conf_load: Processing thread 0 - config file /etc/motion/motion.conf
[-1083001888:motion] [NTC] [ALL] config_camera: Processing camera config file /etc/motion/camera1.conf
[-1083001888:motion] [NTC] [ALL] config_camera: Processing camera config file /etc/motion/camera2.conf
[-1083001888:motion] [NTC] [ALL] motion_startup: Motion 4.1.1 Started
[-1083001888:motion] [NTC] [ALL] motion_startup: Logging to syslog
[-1083001888:motion] [NTC] [ALL] motion_startup: Using default log type (ALL)
[-1083001888:motion] [NTC] [ALL] motion_startup: Using log type (ALL) log level (WRN)

Once motion runs, it provides a webpage at http://localhost:8080. The webpage will show the live stream of the cameras, and allows for some basic control.

Service

OpenRC

As of motion-4.3.1 there are new configuration parameters in /etc/conf.d/motion:

Parameter	Description	Default value
MOTION_USER	The user motion will run under, provided by acct-user/motion	motion
MOTION_GROUP	The group motion will run under, provided by acct-group/motion	motion
MOTION_CONFIGFILE	Motion config file	/etc/motion/motion.conf
MOTION_LOGFILE	A complete file name, e.g. /var/log/motion/motion.log	Not set, meaning syslog
MOTION_LOGTYPE	What motion should log: 1-9 for COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL	9, meaning all
MOTION_LOGLEVEL	The amount of log messages: 1-9 for EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL	6, meaning notice
MOTION_DIR	Runtime default directory	/var/lib/motion
MOTION_UMASK	The umask that motion uses. Use 007 for read/write access by the same user and group motion runs under.	Not set, meaning default umask.

Take note of the supervise-daemon USE flag, which, when set, will make motion run under OpenRC's supervise-daemon. Once satisfied with the configuration start the motion daemon process:

root #rc-config add motion default

root #rc-service motion start

Security

Whenever one uses cameras it should be done in a safe manner:

• avoid to aim cameras at privacy sensitive areas
• for IP cameras:
  • use specific usernames or passwords on IP cameras; do not use default ones
  • prevent direct access to or from the Internet to your cameras; block access on the firewall or router.

Password protection

The webcontrol page and the streams can be protected with username and passwords, using three authentication mechanisms:
0 = disabled
1 = Basic authentication
2 = MD5 digest (the safer authentication)

FILE /etc/motion/motion.conf

webcontrol_authentication <username>:<password>
webcontrol_auth_method 2
stream_authentication <username>:<password>
stream_auth_method 2

SSL/TLS

Motion-4.2.2 and later supports SSL/TLS, which is great if the webserver or the streams are exposed over LAN, WAN or the Internet. A few quick steps to get going.

It's possible to create own self signed certificates as follows:

root #mkdir /etc/ssl/motion

root #cd /etc/ssl/motion

root #openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -keyout motion.key -outform pem -out motion.pem -subj "/CN=*.com"

root #chown motion:motion motion.key motion.pem

Update /etc/motion/motion.conf:

FILE /etc/motion/motion.conf

webcontrol_key /etc/ssl/motion/motion.key
webcontrol_cert /etc/ssl/motion/motion.pem
webcontrol_tls on
stream_tls on

The motion webserver is now accessible over https instead of http.

Restrict webcontrol and streams to localhost

It might be a good idea to prevent the webcontrol page and/or the streams to be accessible on other computers:

FILE /etc/motion/motion.conf

webcontrol_localhost on
stream_localhost on

Database

Motion contains functionality to log events in a database. Supported databases include MySQL, MariaDB, Postgress, and sqlite3. To use this functionality, the relevant USE flag has to be enabled, tables need to be created in the database, and the functionality need to be enabled in the configuration of motion. This chapter contains an example for sqlite, adapt as needed for other databases.

Create a sqlite database e.g. at /data/motion.sqlite and define a table called ""security"", as follows:

root #sqlite3 /data/motion.sqlite

CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp(14), event_time_stamp timestamp(14), text_event char(80));

Exit with Ctrl-D .

Include the following to the motion configuration file:

FILE /etc/motion/motion.conf

database_type sqlite3
database_dbname /data/motion.sqlite
sql_log_picture on
sql_log_snapshot on
sql_log_movie on
sql_query insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')

Now every time a new picture, snapshot or movie is created, a new entry with details is written in the database. An application can use these details to retrieve the relevant file.

Housekeeping

Be aware that motion can produce many large files each day, which can take up a lot of storage. It might be a good idea to purge older files. Consider running a purging command like:

CODE

/usr/bin/find <storage-location> -type f -mtime +<days> -delete

from a daily cron job, which would remove files older than <days> time from a folder <storage-location>.