Установка SHOUTcast
В данном руководстве описаны шаги, необходимые для настройки потокового радиосервера с использованием SHOUTcast Server и SHOUTcast Trans.
Настройка SHOUTcast Server
Установка файлов
SHOUTcast Server находится в пакете media-sound/SHOUTcast-server-bin. Его можно установить с помощью следующей команды:
root #emerge --ask shoutcast-server-binТеперь SHOUTcast Server будет установлен. Следующий шаг — это настройка нового SHOUTcast Server.
Настройка SHOUTcast Server
После установки сервера, его необходимо настроить. Конфигурационный файл находится в /etc/shoutcast/sc_serv.conf. Начнем настройку. Убедитесь, что вы — root, и откройте конфигурационный файл вашим любимым редактором. Я выбрал vi для примера. Открываем файл:
root #vi /etc/shoutcast/sc_serv.confКоманда выведет на экран конфигурационный файл SHOUTcast Server, состоящий из набора параметров. Давайте посмотрим, как настроить некоторые из них.
Обязательные параметры
; MaxUser. Максимальное число одновременных слушателей.
; Используйте разумное значение, исходя из ширины провайдерского канала
; (например, для выходного DSL-канала в 256 Кбит/сек и вещания
; на 24 Кбит/сек, нужно выбрать 256/24=10 слушателей). Если вы установите
; большее значение и к вашей станции присоединится больше людей,
; чем она может обслужить, то это приведет к засорению
; памяти и невозможности вещания.
MaxUser=10
Этим параметром устанавливается максимальное число пользователей. Как сказано выше, неразумно устанавливать ограничение в 100 пользователей при выходном канале в 256 Кбит/сек (в листинге показаны настройки для моего канала, у него как раз примерно такая выходная пропускная способность). Если SHOUTcast Server работает в локальной сети, то данное число, скорее всего, может быть НАМНОГО больше (запросто может превышать 100). Однако помните, что не стоит занимать весь канал, какой бы он ни был. Аренда канала может стоить довольно дорого, а некоторые провайдеры могут ограничить скорость или выписать крупный штраф (а может, и то и другое).
; Пароль. SHOUTcast никогда не спрашивает пароль у слушателей,
; он необходим для доставки аудиопотока на сервер и выполнения
; администратором действий через веб-интерфейс. Пароль должен
; состоять только из букв и цифр. Такой же пароль должен ввести в
; плагин SHOUTcast Source для Winamp тот, кто отвечает за
; формирование аудиопотока. ЗНАЧЕНИЕ НЕ МОЖЕТ БЫТЬ ПУСТЫМ.
Password=a_hard_to_crack_password
Здесь вы настраиваете пароль, записывается он открытым текстом. В целях безопасности СТРОГО рекомендуется выбирать пароли, не используемые в критически важных компонентах системы или для доступа к какой-либо тайной информации. Составляйте пароли из как можно более случайных наборов букв и цифр. Пароль будет использоваться программой SHOUTcast Trans (или любым другим поставщиком данных) для соединения с сервером вещания и отправки на него потока данных.
; PortBase. Номер порта, на котором будет работать сервер.
; Этот порт, а также следующий за ним должны быть свободны. Если при старте
; сервер выдает фатальную ошибку при попытке DNAS настроить
; сокет, проверьте, что на данном порту не работает никакая другая
; программа (telnet localhost номер_порта — если соединение оборвалось,
; то данный порт можно использовать). Для использования портов с номерами меньшими
; чем 1024 на компьютерах *nix могут потребоваться права root.
; По умолчанию используется порт 8000.
PortBase=8000
Это значение определяет номер порта, к которому будут подключаться пользователи SHOUTcast Server. По умолчанию это порт 8000, и именно к нему по умолчанию подключаются программы, умеющие работать с mp3-серверами (Audacious, winamp, и т. п.). Как указано выше, при использовании номеров, меньших чем 1024, необходимо иметь права root. Однако запуск SHOUTcast Server на портах с номерами меньше 1024 настоятельно не рекомендуется.
; LogFile. Файл для записи событий. Для отключения ведения записи можно
; указать '/dev/null' или 'none', либо оставить поле пустым.
; На системах *nix значение по умолчанию — ./sc_serv.log,
; на win32 — каталог_sc_serv\sc_serv.log.
; Примечание: если вы не укажете каталог, то на системах win32
; будет использоваться каталог с исполняемым файлом, а на системах
; *nix — текущий каталог.
LogFile=/var/log/SHOUTcast.log
Здесь указывается расположение файла логов сервера. ebuild устанавливает этот параметр в /dev/null, поэтому если необходима запись событий, то нужно изменить его. Я пометил файл логов в каталог /var/log. Вы можете поместить его туда, куда вам нужно.
; RealTime отображает строчку статистики, которая обновляется каждую секунду.
; Показывается последняя информация по текущему потоку (только на консольных системах *nix и win32)
RealTime=0
Эта опция отображает информацию по текущей песне на стандартный вывод каждую секунду. В файле ebuild эта возможность отключена, чтобы демон SHOUTcast работал так тихо, как это возможно. Установите данную настройку в 1, если вы хотите видеть эти обновления каждую секунду. Однако я рекомендую вам вместо этого использовать страницу статуса.
; Настройка ScreenLog контролирует, печатать ли сообщения логов на экран или нет
; на консольных системах *nix и win32. Полезно отключить ее, если
; сервера работают в фоне без своих терминалов. По умолчанию значение равно 1
ScreenLog=0
В файле ebuild данная опция по умолчанию отключена, чтобы демон работал так тихо, как это возможно. Данная опция будет логгировть любые события (соединения, отсоединения, и т.д.) на стандартный вывод, по мере того, как они происходят в реальном времени. Однако так как файл логов делает то же самое, я бы порекомендовал вместо данной опции использовать его.
; ShowLastSongs specifies how many songs to list in the /played.html
; page. The default is 10. Acceptable entries are 1 to 20.
ShowLastSongs=10
Just as it states, this value will set how many of the most recently played /played.html will display. If you put more than 20, you should probably consider more coffee.
; TchLog decides whether or not the DNAS log file should track yp
; directory touches. Adds and removes still appear regardless of
; this setting.
; Default is yes
; TchLog=yes
This setting enables or disables logging for directory modifications by the DNAS (Distributed Network Audio Server), or SHOUTcast for short. Recommended for those who wish to have the most secure logging possible. Basic home/casual users probably don't need this.
; WebLog decides whether or not hits to http:// on this DNAS will
; be logged. Most people leave this off because the DSP plug-in
; uses http:// calls to update titles and get the listener count,
; which takes up a lot of log space eventually. If you want to
; see people making hits on your admin.cgi or index pages, turn
; this back on. Note that this setting does NOT affect XML stats
; counters for hits to http:// pages.
; Default is no.
; WebLog=no
This specifies whether or not you want to log hits to the HTTP server that SHOUTcast provides. Once again, recommended for those who wish the most secure logging possible, but not recommended for home/casual users.
; W3CEnable turns on W3C Logging. W3C logs contain httpd-like accounts
; of every track played for every listener, including byte counts those listeners
; took. This data can be parsed with tools like Analog and WebTrends, or given
; to third parties like Arbitron and Measurecast for their reporting systems.
; Default is Yes (enabled).
W3CEnable=Yes
; W3CLog describes the name of the log file for W3C logging. Default log file is
; sc_w3c.log, in the same directory wherever the DNAS gets started from.
W3CLog=/dev/null
The first option enables W3C logging. This type of logging can be easily parsed by the programs listed. This is highly recommended for those who wish to have the most in depth statistics possible. The second option specifies where to store the W3C log. This is set to /dev/null by the ebuild.
Настройка сети
; SrcIP, the interface to listen for source connections on (or to make relay
; connections on if relaying). Can and usually will be ANY or 127.0.0.1
; (Making it 127.0.0.1 will keep other machines from being able to
; broadcast using your SHOUTcast Server )
SrcIP=ANY
The SrcIP variable sets what IP streaming content is coming from. This can be another server (relaying), localhost (regular), or any other IP that your interface supports. Setting to localhost prevents any other server from using your SHOUTcast Server as a broadcast source. The default is ANY and will cause your SHOUTcast Server to source from any IP. Security wise, it is better to set this to something specific.
; DestIP, IP to listen for clients on (and to contact yp.SHOUTcast.com)
; can and usually will be be ANY. If your machine has multiple IP addresses,
; set this to the one you want it to be accessed by.
DestIP=ANY
This determines which IP on your interface you will allow users to connect to. This can be localhost (if you're anti-social and wish only to stream to yourself), a private IP (for instance, 192.168.0.101, for hosting to a local network), or your external IP (for instance, 209.204.249.201, for streaming to a WAN, but not a LAN). In most cases, you can reach your own stream by using 127.0.0.1 instead of what is listed here. ANY lets your SHOUTcast Server bind to all IP addresses on all available interfaces.
; Yport, port to connect to yp.SHOUTcast.com on. For people behind caching
; web proxies, change this to the alternate port (666 is what it might be,
; check www.SHOUTcast.com if you have problems). Otherwise, leave this at 80.
; We're actively working on re-opening port 666, but as of release the only
; working port is port 80.
Yport=80
This has 2 functions. First is the port to connect to yp.SHOUTcast.com with. yp.SHOUTcast.com is nullsoft's page for public servers so users know where to listen in on. Users can search for your station from this page. The secondary use is for web proxies. Set this to the port you use for proxy connects, and set DestIP to your proxy for streaming.
; NameLookups. Specify 1 to perform reverse DNS on connections.
; This option may increase the time it takes to connect to your
; server if your DNS server is slow. Default is 0 (off).
NameLookups=0
This option specifies whether or not you want to perform reverse DNS lookups on clients. This would take an IP address and try to find out the corresponding host name. Use this for logging purposes to create a more detailed report.
; RelayPort and RelayServer specify that you want to be a relay server.
; Relay servers act as clients to another server, and rebroadcast.
; Set RelayPort to 0, RelayServer to empty, or just leave these commented
; out to disable relay mode.
; RelayPort=8000
; RelayServer=192.168.1.58
This specifies that you are acting as a relay server. Relay servers are often used to take a low bandwidth connection that can only stream to one client, and use its own higher bandwidth to serve to more clients. RelayPort specifies the port and IP address of the SHOUTcast Server you wish to relay for. Comment this out if you don't plan on using your server as a relay.
Настройка сервера
; AdminPassword. This password (if specified) changes the
; behavior of Password to be a broadcast-only password, and
; limits HTTP administration tasks to the password specified
; here. The broadcaster, with the password above, can still
; log in and view connected users, but only the AdminPassword
; will grant the right to kick, ban, and specify reserve hosts.
; The default is undefined (Password allows control for both
; source and admin)
; AdminPassword=adminpass
Setting this will create a broadcaster and administrator. The broadcaster can log in with Password, and view connections. However, should the person want to kick/ban/administer the server, they must have the Admin password. This option creates more specific roles for your server. This is recommended for instances where the system administrator is not the same person as the broadcaster.
; AutoDumpUsers controls whether listeners are disconnected if the source
; stream disconnects. The default is 0.
AutoDumpUsers=0
This specifies whether or not users are kicked out if the stream disconnects for any reason. This is set to 0, so that clients will either timeout themselves, or keep trying to buffer a stream. Use this if you expect short interruptions at any time.
; AutoDumpSourceTime specifies how long, in seconds, the source stream is
; allowed to be idle before the server disconnects it. 0 will let the source
; stream idle indefinitely before disconnecting. The default is 30.
AutoDumpSourceTime=30
This specifies when the SHOUTcast Server should give up waiting for a source (mainly a relay server) to stream content from. Anywhere from 30 to 60 should be a reasonable value for this.
; ContentDir specifies the directory location on disk of where to stream
; on-demand content from. Subdirectories are supported as of DNAS 1.8.2.
; Default is ./content/, meaning a directory named content in the same directory
; as where sc_serv was invoked from.
ContentDir=/opt/SHOUTcast/content/
The ContentDir specifies where to put on demand content. For example, if you wish to stream an announcement to employees, you could use this for that purpose. The SHOUTcast Server ebuild sets this to /opt/SHOUTcast/content for you. To use this, put an mp3 in the content directory, then point your browser to http://example.com:[port]/content/mp3name.pls . SHOUTcast Server will automatically create a streaming media compatible play list for the mp3, and stream it on demand. Use this as an alternative to SHOUTcast Trans for streaming media source.
; IntroFile can specify a mp3 file that will be streamed to listeners right
; when they connect before they hear the live stream.
; Note that the intro file MUST be the same sample rate/channels as the
; live stream in order for this to work properly. Although bit rate CAN
; vary, you can use '%d' to specify the bit rate in the filename
; (i.e. C:\intro%d.mp3 would be C:\intro64.mp3 if you are casting at 64kbps).
; The default is no IntroFile
; IntroFile=c:\intro%d.mp3
This allows you to configure an intro file. Every time users connect, they'll hear this file played. As it states, the stream bit rate and the intro song bit rate must match, or else things will break. You can, however, put something such as intro128.mp3 and intro64.mp3, and it will play intro128.mp3 to users connecting to a 128kbps stream, and intro64.mp3 for users connecting at 64kbps.
; BackupFile can specify a mp3 file that will be streamed to listeners over
; and over again when the source stream disconnects. AutoDumpUsers must be
; 0 to use this feature. When the source stream reconnects, the listeners
; are rejoined into the live broadcast.
; Note that the backup file MUST be the same sample rate/channels as the
; live stream in order for this to work properly. Although bit rate CAN
; vary, you can use '%d' to specify the bit rate in the filename
; (i.e. C:\backup%d.mp3 would be C:\backup32.mp3 if you are casting at 32kbps).
; The default is no BackupFile
; BackupFile=C:\intro%d.mp3
This is the same as above, but will be played when the stream source ends, instead of when users disconnect. This will only work if AutoDumpUsers is set to 0.
; TitleFormat specifies a format string for what title is sent to the listener.
; For example, a string of 'Justin Radio' forces the title 'Justin Radio' even
; when the source changes the title. You can use up to one '%s' in the string
; which lets you contain the title from the source. For example, if your
; TitleFormat is 'Justin Radio: %s', and the source plug-in's title is
; 'Billy plays the blues', then the net title is
; 'Justin Radio: Billy plays the blues'. Note: only works on non-relay servers.
; The default is no format string.
TitleFormat=Chris Gentoo Beats: %s
This sets up a non-variable title for your SHOUTcast server. Use this if your source stream differs from your SHOUTcast Server's name. This will NOT work with relay servers.
; URLFormat specifies a format string for what URL is sent to the listener.
; Behaves like TitleFormat (see above).
; The default is no format string.
; URLFormat=http://www.server.com/redirect.cgi?url=%s
This is the same as TitleFormat except that the URL listed above is used instead of the source stream's URL.
; PublicServer can be always, never, or default (the default, heh)
; Any setting other than default will override the public status
; of the source plug-in or of a SHOUTcast Server that is being relayed.
PublicServer=default
This specifies whether or not you want to be listed as a public server even if your relay server/source plug-in is listed as such.
; AllowRelay determines whether or not other SHOUTcast Servers will be
; permitted to relay this server. The default is Yes.
AllowRelay=Yes
AllowRelay determines if other servers are allowed to relay your content. If you don't think you'll ever relay at all, set this to No.
; AllowPublicRelay, when set to No, will tell any relaying servers not
; to list the server in the SHOUTcast directory (non-public), provided
; the relaying server's Public flag is set to default. The default is
; Yes.
AllowPublicRelay=Yes
AllowPublicRelay specifies whether or not you wish to be listed in the SHOUTcastpublic directory if the server you're relaying to is already listed. Note that PublicServer can override this setting.
; MetaInterval specifies how often, in bytes, meta data sent.
; You should really leave this at the default of 32768, but the option is
; provided anyway.
MetaInterval=32768
Just leave this as is.
Настройка доступа
; ListenerTimer is a value in minutes of maximum permitted time for
; a connected listener. If someone is connected for longer than this
; amount of time, in minutes, they are disconnected. When undefined,
; there is no limit defined. Default is undefined.
; ListenerTimer=600
I'm not to sure why you'd need this one. Basically, if a user is on for too many minutes, disconnect them. Only thing I can think of is to kick idlers off, or people you think should be doing other things than listening to your stream. Value is measured in minutes.
; BanFile is the text file sc_serv reads and writes to/from
; for the list of clients prohibited to connect to this
; server. It's automatically generated via the web
; interface.
; BanFile=sc_serv.ban
This is the filename for the list of clients that are banned from your server. The default is sc_serv.ban, but you can use whatever name you so desire with this setting.
; RipFile is the text file sc_serv reads and writes to/from
; for the list of client IP addresses which are *ALWAYS* permitted
; to connect to this server (useful for relay servers).
; This file is automatically generated via the web
; interface. Note that if your server is FULL, and someone
; from a Reserved IP connects, the DNAS will force the person
; listening for the longest time off to make room for the new
; connection.
; RipFile=sc_serv.rip
As grim as it sounds, Rip actually stands for "Reserved IP". Use this for your friends or other people you consider more important than random users. If you are currently streaming to the max number of users possible, and one of your rip members tries to get on, it will kick the longest listening person from the server to get them on.
; RipOnly, when set to Yes, will only allow IP addresses listed in the Reserved
; IP list to connect and relay. All other connections for listening will be denied.
; This is really only useful for servers whose sole purpose is to provide the
; primary feed to all public relays. Setting this value to Yes also forces the
; server into Private mode, since listing this server in the directory would
; be pointless. Default is No.
; RipOnly=No
This allows for only Rip members to connect to your SHOUTcast Server. You can either use this for private radio streams, or to make it so that only certain relays will be able to access your stream.
Mass Configuration
; Unique: assigns a variable name for use in any configuration item which points to a
; file. Useful for servers running lots of SHOUTcast Servers that have similar
; configuration parameters, excepting log file names, ban file names, etc. Any
; parameter that takes a pathname can include the character $, which will
; substitute $ for the variable assigned here. Keep in mind that the unique
; variable can only be used after it is defined, so don't try to use a unique
; variable substitution in a path before you define it. For example, you
; could set:
; Unique=my_server
; and then define Log=/usr/local/SHOUTcast/$.log in an included configuration
; file. Default is Unique=$, so that by default any file with $ in the name
; won't substitute anything at all.
Basically, if you're running lots of SHOUTcast Servers, it would be a dire pain to change all the log/ban/etc. files to something unique for every configuration. Instead, you can set Unique to something, and $ will be replaced with whatever Unique is set to. For example, if one file had Unique=Jazz and another had Unique=Rock, then Log=/var/log/$.log would produce /var/log/Jazz.log on one configuration file and /var/log/Rock.log on another configuration file. Much easier when dealing with multiple SHOUTcast Servers on similar configurations.
; Include: instructs the sc_serv to read from the named configuration file,
; *at the point of insertion of the Include statement*, and process as though
; the included file was part of itself. Note that all configuration parameters
; in the DNAS configuration file are processed first to last, so if an item is defined
; twice in a configuration, the last item to process will be the one that takes
; effect. For this reason, it's usually a good idea to use the Includes first
; in a configuration file.
; example:
; Include=/usr/local/SHOUTcast/common.conf
; Default is not applicable.
If you're running multiple SHOUTcast Servers and wish to utilize similar configuration variables without setting them all for each configuration file, you can set this to point to a file that contains settings that are similar between multiple configurations.
Optimization Configuration
; CpuCount is used to explicitly limit the DNAS to dominating a finite
; amount of processors in multiprocessor systems. By default,
; SHOUTcast creates one thread for every processor it detects in the
; host system, and assigns listeners equally across all the threads.
; In the event SHOUTcast doesn't correctly determine the number of
; CPUs in your host, or if you for whatever reason want to force
; the DNAS to not use other processors, you can say so here.
; Default behavior is to use as many processors as the DNAS detects on
; your system.
; CpuCount=1
On multiple CPU systems, use this setting to force the SHOUTcast Server to utilize CpuCount # of processors. The default to assign one thread to each processor, and have listeners across all the threads. If you set this lower than your total processor count, this will leave processors free to do other things.
; Sleep defines the granularity of the client threads for sending data.
; DNAS 1.7.0, per client thread, will send up to 1,024 bytes of data
; per socket (or less depending on the window available), and then
; sleep for the provided duration before repeating the whole process.
; Note that making this value smaller will vastly increase CPU usage on
; your machine. Increasing reduces CPU, but increasing this value too far
; will cause skips. The value which seems most optimal for 128kbps
; streaming is 833 (833 microseconds per client poll) on our test labs.
; We wouldn't recommend setting it any lower than 100, or any higher than
; 1,024. If you have a slower machine, set this number lower to fix
; skips.
; Default value is 833.
; Sleep=833
The SHOUTcast Server will use the sleep value in determining the gap between sending data. The higher the value, the longer the gap, the lower the value, the shorter the gap and the more CPU usage SHOUTcast Server will take up. On slower systems, as it states, you might want to lower this so that the SHOUTcast Servers sends data more and more frequently to users. Best to leave as is.
; CleanXML strips some whitespace and line feeds from XML output which
; confuses some (poorly written) XML parsers. If you get XML rendering errors,
; try turning this on. Default is No (off).
; CleanXML=No
Probably don't need to worry about this setting to much unless you use custom XML parsers to create custom statistics for you server. If the XML parser cannot handle whitespace and line feeds in XML, set this to Yes, and all should work.
Configuration Conclusion
Your SHOUTcast Server should now be configured. For businesses that are using SHOUTcast, I recommend turning on WC3 logging, as it can be easily parsed, and used for creating custom statistics. You should also enable the AdministratorPassword. You might also wish to enable some of the mass configuration options if you're creating multiple SHOUTcast Servers.
With the configuration setup, we'll now work on getting SHOUTcast up and running. We'll start with simple on demand streaming for a simple startup, then work on SHOUTcast Trans later (as it is somewhat more involved).
Getting started with SHOUTcast Server
Setting up on demand streaming
On demand streaming, as shown in the configuration chapter, automatically sets up on demand play lists for mp3 files in the content directory. The SHOUTcast server ebuild has a directory setup in /opt/SHOUTcast/content for all your on demand mp3's. Let's get started by creating a simple on demand streaming mp3.
First we'll need to get an mp3 from somewhere and put it in the content directory. We'll take this sample.mp3 file from an /Mp3 directory I have created.
root #cp sample.mp3 /opt/SHOUTcast/content/
root #cd /opt/SHOUTcast/content/
root #lssample.mp3
OK, so the file is copied over now. Now we'll need to startup our SHOUTcast Server so the file can be accessed.
root #/etc/init.d/shoutcast start * Starting Shoutcast Server...
*******************************************************************************
** SHOUTcast Distributed Network Audio Server
** Copyright (C) 1998-2004 Nullsoft, Inc. All Rights Reserved.
** Use "sc_serv filename.ini" to specify an ini file.
*******************************************************************************
[ ok ]
The little banner is there to make sure that nothing dies right away (i.e. so you know your server actually started). Your SHOUTcast Server is now started! Because of the nature of on demand content, you will ONLY be able to access it from a browser. MPlayer or anything else won't be able to stream it as is. I use kmplayer in order to access the stream directly from my browser. You can see the result on the next image.
Some people have Audacious setup to handle their audio mime types, so your browser may spawn Audacious up in order to play the resulting streaming content. Now that you are able to work with on demand content, we'll now work on using SHOUTcast Trans to create a true streaming radio server.
Setting up SHOUTcast Trans
SHOUTcast Trans introduction
SHOUTcast Trans stands for SHOUTcast Trans(coder), as it is able to transcode mp3's to lower or higher bit rates. SHOUTcast Trans works by streaming mp3's from a play list specified in the configuration file. We'll begin to setup the configuration for SHOUTcast Trans, so that we can have a real to goodness streaming radio station. We'll begin by opening the configuration file for SHOUTcast Trans, which just so happens to be located in /etc/shoutcast/sc_trans.conf.
root #emerge --ask shoutcast-trans-binroot #vi /etc/shoutcast/sc_trans.confNow that we have the SHOUTcast Trans configuration file open, we'll begin to setup the streaming source.
Configuring SHOUTcast Trans
; PlaylistFile (required EVEN IF RELAYING) - play list file (to create, use
; find /path/to/mp3/directory -type f -name "*.mp3" > playlist_filename.lst
PlaylistFile=/opt/SHOUTcast/playlists/playlist.lst
This setting tells SHOUTcast where to find its streaming media content from. This setting requires an existing file, so let's go ahead and create a play list. I'll create one real quick from my /Mp3 directory referred to earlier.
user $find /Mp3 -type f -name "*.mp3" > /opt/SHOUTcast/playlists/playlist.lstNow that the play list is setup, we point the configuration file to it, and SHOUTcast Trans will now know what files to stream.
; Serverip/ServerPort are the target server to send to
Serverip=127.0.0.1
ServerPort=8000
This setting decides where to send the streaming content. In this guide, it will be the SHOUTcast Server's IP and port that you setup previously (DestIP and PortBase).
; Password is the password on the sc_serv you're sending to.
Password=password_you_setup_in_sc_serv.conf
The is the same password that you setup in the SHOUTcast Server configuration.
; StreamTitle/URL/Genre define the data that appears on the directory and in the
; stream info.
StreamTitle=Chris Gentoo Beats
StreamURL=http://www.gentoo.org
Genre=JPOP Electronica And More!
This sets up the title of your stream (i.e. Radio One), the URL (i.e. http://www.radio-one.com), and the Genre (i.e. Electronica Trance Tribal).
; Logfile optionally denotes a text file to log sc_Trans to. a kill -HUP
; will force a close and re-open of this file (but will also cease logging to
; the console)
LogFile=/var/log/sc_Trans.log
This will point to the log file for SHOUTcast Trans. All your logging goes here.
; Shuffle the play list
Shuffle=1
Decide on whether or not you want your play list to play random songs from your list each time. Most will set this to 1. If you're going to be accepting song requests, set this to 0 and I'll explain how to do that later on.
; Bitrate/SampleRate/Channels recommended values:
; 8kbps 8000/11025/1
; 16kbps 16000/11025/1
; 24kbps 24000/22050/1
; 32kbps 32000/22050/1
; 64kbps mono 64000/44100/1
; 64kbps stereo 64000/22050/2
; 96kbps stereo 96000/44100/2
; 128kbps stereo 128000/44100/2
Bitrate=128000
SampleRate=44100
Channels=2
; Quality is from 1-10. 1 is best, 10 is fastest.
Quality=1
Bitrate sets up the bit rate for your stream. This can be from 8000 (8kbps) to 128000 (128kbps). SampleRate sets the sampling rate of the stream. This can be anything from 11025 (11025kHz) to 44100 (44100kHz). Channels sets how many channels your stream will broadcast. This can be anything from 1 (mono) to 2 (stereo). Quality sets the stream quality. This is somewhat still controlled by the Bitrate/SampleRate/Channels. This is where you deal with how compressed the stream is. 1 gives you best quality, 10 gives you the best speed. Keep your connection in mind when you set these values! Use the guide given in order to figure out what your mp3's should be streamed at.
; Mode=0 for none, 1 for 100/100->100/0, 2 for 0/100->100/0
CrossfadeMode=1
; Length is ms.
CrossfadeLength=8000
This sets up song cross fading. Setting this to 0 will disable cross fading. If you set it to 1, Song 1 will fade out and Song 2 will fade in. If you set it to 2, Song 1 will fade in and Song 2 will fade out. The length is how long in ms the cross fade occurs.
UseID3=1
This decides whether or not you wish to use the ID3 tag for information about the mp3.
; Public determines whether or not this station will show up in the directory
Public=0
This sets up whether or not streams should be publicly listed when relaying to a server. Remember PublicServer in sc_serv.conf can over-ride this!
; Put stuff here for user interaction (AOL IM, ICQ, IRC)
AIM=AIMHandle
ICQ=
IRC=SHOUTcast
This sets up the information on how to reach you (the DJ). You can setup AIM or ICQ channels for song requests/anything. You can setup your own IRC channel as well, so that you can interact with multiple users at once.
SHOUTcast Trans Setup Conclusion
Your SHOUTcast Trans is now ready to stream to your SHOUTcast Server! We'll now get started on streaming your mp3's.
Getting Started With SHOUTcast Trans
Starting up SHOUTcast Trans
As I most often use SHOUTcast Trans with SHOUTcast Server, I tend to startup SHOUTcast Trans, which in turns starts up SHOUTcast for you (much easier). So we'll go ahead and get SHOUTcast Trans started.
root #/etc/init.d/shoutcast_trans start * Starting Shoutcast Server...
*******************************************************************************
** SHOUTcast Distributed Network Audio Server
** Copyright (C) 1998-2004 Nullsoft, Inc. All Rights Reserved.
** Use "sc_serv filename.ini" to specify an ini file.
*******************************************************************************
[ ok ]
* Starting Shoutcast Trans... [ ok ]
Listening to the SHOUTcast Trans stream
Now that SHOUTcast Trans is started, we'll start listening to the stream. I use MPlayer in this example to play the stream.
user $mplayer -cache 1024 http://127.0.0.1:8000/... Playing http://127.0.0.1:8000/. Connecting to server 127.0.0.1[127.0.0.1]:8000 ... Name : Chris Gentoo Beats Genre : JPOP Electronica And More! Website: http://www.gentoo.org Public : no Bitrate: 128kbit/s Cache size set to 1024 KBytes Connected to server: 127.0.0.1 Cache fill: 9.38% (98304 bytes) Audio file detected. ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 MP3lib: init layer2 and 3 finished, tables done mpg123: Can't rewind stream by 156 bits! AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 16000->176400 (128.0 kbit) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian) AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps) Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit... Video: no video Starting playback...
This was somewhat clipped. The -cache variable was put in to over-ride my somewhat larger buffering settings. And voilà ! You're now listening to streaming media! In the next chapter, we'll show you how to do a little bit more with your SHOUTcast Server.
Advanced SHOUTcast Usage
Business Usage
Businesses can use SHOUTcast in a number of ways:
- Use on demand content streaming to make more interesting daily announcements.
- Have streaming public announcements available as they happen, let your clients know what's going on, on the spot! Then archive them as on demand content streaming for future reference.
- Do interviews as streaming media and archive them as on demand content streaming.
There are more possibilities on how to utilize SHOUTcast Server for businesses. Use live streaming media instead of boring old text!
DJ-ing with SHOUTcast
SHOUTcast Server is one of the most popular servers for both new and veteran DJs alike. For those just starting, there are a few ways to increase the user experience of your SHOUTcast Server. Having an intro song is very key. It gives the users an idea of what your station is all about. Be sure to include this! Post your server on yp.SHOUTcast.com (described in the SHOUTcast Server configuration section) so that everyone knows where you are. One of the most unique things is to be able to take requests. To set up requesting, first turn Shuffle off in sc_Trans.conf. Have about, I'd say, 10 or so songs ready to get you started. Then start requesting song requests in the middle. When someone requests a song, simple add it to the end of your play list, and then you can use this script here to control what SHOUTcast Trans does with your play list:
#!/bin/bash
case "$1" in
"reload")
kill -s USR1 `cat /var/run/SHOUTcast_Trans.pid`
;;
"next")
kill -s WINCH `cat /var/run/SHOUTcast_Trans.pid`
;;
*)
echo "Invalid command"
;;
esac
When you've added the song to the play list, you need to tell SHOUTcast Trans that your play list has changed with the new request entry.
user $djcontrol reloadYou should now let the users know after what song the requests will start. Or if you want, you can keep skipping with:
user $djcontrol nextBe careful not to skip too much, as there is no previous control. Once you hit their song, the requesting begins. I'd get about 5 or so requests before you start requesting. This way you don't run all the way back to the beginning. If you start to lack in requests and expect that your request hour is over with, then simply copy your next session's play list over the requests play list and reload the play list. Once the current song is over, it will go back to the new play list.
Заключение
That ends it for the SHOUTcast Server and SHOUTcast Trans tutorial. I hope you benefited from the information here and please email me any comments or suggestions for this page! Enjoy your new streaming SHOUTcast Server!
This page is based on a document formerly found on our main website gentoo.org.
The following people contributed to the original document: Chris White, Shyam Mani
They are listed here because wiki history does not allow for any external attribution. If you edit the wiki article, please do not add yourself here; your contributions are recorded on each article's associated history page.