Note to translators
This page was improperly translated to Italian. It would be helpful if someone who can do Italian translations could use the content from
this page to recreate an Italian translation using the standard wiki translation framework (click translation link at top of this page), then we can delete that imporperly translated page. See
Help:Translating.
This article provides a summary of "safe" settings for CFLAGS on Gentoo Linux.
Default CFLAGS can be set in make.conf for Gentoo systems. CFLAGS can also be specified per-package.
Automatic CPU detection by the compiler
A recommended default choice for CFLAGS or CXXFLAGS is to use -march=native
. This enables auto-detection of the CPU's architecture. A possible entry might look like:
FILE /etc/portage/make.conf
COMMON_FLAGS="-O2 -pipe -march=native"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
WarningDo
not use
-march=native
or
-mtune=native
in the
CFLAGS or
CXXFLAGS variables of
make.conf when compiling with
distcc. Consult the
distcc page about how to set up
CFLAGS/
CXXFLAGS correctly.
To see what GCC detects "native" to be for certain system in particular, the following command can be run:
user $
gcc -v -E -x c /dev/null -o /dev/null -march=native 2>&1 | grep /cc1 | grep mtune
The internal translation of -march=native
will be visible in the output. In some cases, if the CPU is unknown to GCC's detection model, a suboptimal -mtune=generic
(or even no -mtune
) will be visible. In this case, select relevant -mtune=
from manual. In some other cases there are same to detected -march=
or common -mtune=intel
for (too) modern Intel CPUs.
Also possible suboptimal -march=native
detection - full l2-cache-size
to single CPU thread on multi-core CPUs. Currently it used only for prefetching, but sometimes good choice to fallback to default --param=l2-cache-size=512
or own calculated value - to reduce cache concurrency on high SMP load. But this is in theory and not for all tasks - do nothing if unsure.
Additional information can be found at the GCC optimization page.
Determining CPU type in order to set CFLAGS manually
These tools can report system CPU information that can then be matched a CPU from the list further down this page, to get some suggested CFLAGS that are "safe" for that system.
These settings should be used, especially when unsure which CFLAGS the processor needs.
CPU detection with resolve-march-native
A tool exists to automagically determine -march=native
resolution values: app-misc/resolve-march-native. After installing it, issue:
user $
resolve-march-native
Reporting the CPU type with /proc/cpuinfo
To identify the model of the CPU, take a look inside /proc/cpuinfo for the "cpu family" and "model" numbers like so:
user $
grep -m1 -A3 "vendor_id" /proc/cpuinfo
Safe CFLAGS list
x86/amd64
Generic psABI levels
If using a distcc farm with slightly different CPUs, it might make more sense to generate code that is just old enough to work for all of them, without bogging down to the really generic code. The psABI microarchitecture levels aims to provide just that for common eras of amd64 CPUs. See Wikipedia:x86-64#Microarchitecture_levels for a description of the levels.
Intel
Alder Lake
Core i3/i5/i7 12th Gen vendor_id : GenuineIntel
cpu family : 6
model : 154
model name : 12th Gen Intel(R) Core(TM) i7-1260P
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=alderlake -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Skylake, Kaby Lake, Kaby Lake R, Coffee Lake, Comet Lake
Core i3/i5/i7 and Xeon E3/E5 *V5 vendor_id : GenuineIntel
cpu family : 6
model : 94
model name : Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
...
model : 165
model name : Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=skylake -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Warning
Even though they fit the family and model, this set of CFLAGS does NOT work for Skylake Pentium CPUs (e. g. G4400, or J5005) producing invalid code, which may break the system. Use -march=native
for these systems instead.
Broadwell
Core i3/i5/i7 and Xeon E3/E5 *V4 vendor_id : GenuineIntel
cpu family : 6
model : 79
model name : Intel(R) Xeon(R) CPU E5-2683 v4 @ 2.10GHz
…
model : 79
model name : Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=broadwell -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Haswell
Core i3/i5/i7 and Xeon E3/E5/E7 *V3 vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz
…
model : 60
model name : Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=haswell -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Ivy Bridge
Core i3/i5/i7 and Xeon E3/E5/E7 *V2 vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=ivybridge -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Pentium vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Pentium(R) CPU G2020 @ 2.90GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=ivybridge -mno-avx -mno-aes -mno-rdrnd -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Sandy Bridge
Core i3/i5/i7 and Xeon E3/E5/E7 vendor_id : GenuineIntel
cpu family : 6
…
model : 42
model name : Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz
…
model : 45
model name : Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz
…
model : 42
model name : Intel(R) Xeon(R) CPU E31245 @ 3.30GHz
…
model : 45
model name : Intel(R) Xeon(R) CPU E5-2407 0 @ 2.20GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=sandybridge -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Pentium vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Pentium(R) CPU B960 @ 2.20GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=sandybridge -mno-avx -mno-aes -mno-rdrnd -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Nehalem
Core i3/i5/i7 vendor_id : GenuineIntel
cpu family : 6
model : 30
model name : Intel(R) Core(TM) i5-750 CPU @ 2.66GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=nehalem -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Westmere
Core i3/i5/i7 vendor_id : GenuineIntel
cpu family : 6
model : 37
model name : Intel(R) Core(TM) i5-650 CPU @ 3.20GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=westmere -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
NoteIt may be required to add
-mno-aes -mno-pclmul, especially for i3 (enabled by default). No output means not supported:
user $
grep -m1 -e aes -e pclmulqdq /proc/cpuinfo
Intel Core
Intel Core vendor_id : GenuineIntel
cpu family : 6
…
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
…
model : 15
model name : Intel(R) Xeon(R) CPU 3040 @ 1.86GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=core2 -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Older microarchitecture
Pentium M (Dothan) vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 2.13GHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=pentium-m -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Pentium 4 (Prescott) vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) 4 CPU XXXGHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=nocona -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
64-bit capable models:
505, 505J, 506, 511, 516, 517, 519K, 521, 524, 531, 541, 551, 561, 571, 6xx and the 3.73(3)GHz Pentium 4 Extreme Edition.
NoteCheck the /proc/cpuinfo for the lm flag to detect 64-bit CPUs:
user $
grep lm /proc/cpuinfo
The cpuid model (4 vs 3) is
not an indicator of 64-bit compatibility; there are 32-bit family15/model4 CPUs!
All other Prescotts vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU XXXGHz
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=prescott -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
AMD
Ryzen (Zen family)
1000 and 2000 series vendor_id : AuthenticAMD
cpu family : 23
model : 1
model name : AMD Ryzen 7 1800X Eight-Core Processor
…
cpu family : 23
model : 8
model name : AMD Ryzen 7 2700X Eight-Core Processor
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=znver1 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
3000, 4000, 5000, and EPYC 7xx2 series vendor_id : AuthenticAMD
cpu family : 23
model : 113
model name : AMD Ryzen 9 3900X 12-Core Processor
...
cpu family : 23
model : 49
model name : AMD EPYC 7542 32-Core Processor
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=znver2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
5000 and EPYC 7xx3 series vendor_id : AuthenticAMD
cpu family : 25
model : 80
model name : AMD Ryzen 7 PRO 5850U with Radeon Graphics
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=znver3 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
A6/A8/A9/A10/A12-8XXX/9XXX (Excavator)
Carrizo, Bristol Ridge, and Stoney Ridge vendor_id : AuthenticAMD
cpu family : 21
model : 96 or 101 or 112
model name : AMD A12-9800 RADEON R7, 12 COMPUTE CORES 4C+8G
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=bdver4 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
A4/A6/A8/A10-7XXX/8XXX (Steamroller)
Kaveri and Godavari vendor_id : AuthenticAMD
cpu family : 21
model : 48 or 56
model name : AMD A10-7850K Radeon R7, 12 Compute Cores 4C+8G
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=bdver3 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Important
Various lowpower AMD APUs branded as AX-7XXX (eg. A4-7210) don't belong to cpu family 21!
E1/E2-XXXX, A4/A6/A8/A10-XXXX (Jaguar, Puma)
Kabini, Temash, Beema, Mullins, and Carrizo-L vendor_id : AuthenticAMD
cpu family : 22
model : 0 or 48
model name : AMD A4-5000 APU with Radeon(TM) HD Graphics
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=btver2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Important
Majority of AMD APUs branded as A4/A6/A8-XXXX (eg. A4-5300, A4-4000 or A6-5345M) don't belong to cpu family 22! They should use settings listed for AMD APU model given by the cpu family
and model
.
A4/A6/A8/A10-4XXX/5XXX/6XXX (Piledriver)
Trinity and Richland vendor_id : AuthenticAMD
cpu family : 21
model : 16 or 19
model name : AMD A8-4500M APU with Radeon(tm) HD Graphics
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=bdver2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Important
Various low power AMD APUs branded as AX-5XXX/6XXX (eg. A4-5000, A4-5100 or A6-6310) don't belong to CPU family 21!
FX-XXXX
Bulldozer and Piledriver vendor_id : AuthenticAMD
cpu family : 21
model : 1 or 2
model name : AMD FX(tm)-8150 Eight-Core Processor
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=bdver1 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Important
Make sure and check the number listed by model
on the system, the -march
flag should be bdverX where X is the model number.
Important
Various AMD APUs branded as FX don't match model
1 or 2! They should use settings listed for AMD APU model given by the cpu family
and model
.
Z-XX, C-X0, E-XX0, E1/E2-1X00, E2-2000 (Bobcat)
Ontario, Hondo, Desna, and Zacate vendor_id : AuthenticAMD
cpu family : 20
model : 1 or 2
model name : AMD E-350 Processor
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=btver1 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
A4/A6/A8-3XXX/3XXXM (12h)
Llano vendor_id : AuthenticAMD
cpu family : 18
model : 1
model name : AMD A8-3500M APU with Radeon(tm) HD Graphics
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=amdfam10 -mcx16 -mpopcnt -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Phenom/Phenom II, Athlon II, Sempron (10h)
Agena, Deneb, Thuban, and derivatives vendor_id : AuthenticAMD
cpu family : 16
model : X
model name : AMD Phenom(tm) II X6 1090T Processor
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=amdfam10 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Older microarchitectures
Important
Various AMD CPUs branded as Sempron (eg. Sempron 2200+ or Sempron 3000+) don't belong to cpu family 15!
E+ revisions - Athlon 64, Athlon 64 X2/FX, Sempron (0Fh) vendor_id : AuthenticAMD
cpu family : 15
model : >= 39
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=opteron-sse3 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Geode LX vendor_id : AuthenticAMD
cpu family : 5
model : 10
model name : Geode(TM) Integrated Processor by AMD PCS
|
FILE /etc/portage/make.conf CHOST="i486-pc-linux-gnu"
COMMON_FLAGS="-Os -pipe -march=geode -mmmx -m3dnow -fomit-frame-pointer"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Pre-E revisions - Athlon 64, Athlon 64 FX, Sempron (0Fh) vendor_id : AuthenticAMD
cpu family : 15
model : < 39
model name : AMD Athlon(tm) 64 Processor 3200+
|
FILE /etc/portage/make.conf COMMON_FLAGS="-O2 -march=opteron -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
ARM
Cortex-A
ARMv7-A/Cortex-A9 MPCore
with optional VFPv3 FPU processor : 0
model name : ARMv7 Processor rev 0 (v7l)
BogoMIPS : 2.00
Features : half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x1
CPU part : 0xc09
CPU revision : 0
processor : 1
model name : ARMv7 Processor rev 0 (v7l)
BogoMIPS : 2.00
Features : half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x1
CPU part : 0xc09
CPU revision : 0
Hardware : NVIDIA Tegra SoC (Flattened Device Tree)
Revision : 0000
Serial : 0000000000000000
|
FILE /etc/portage/make.conf CHOST="armv7a-hardfloat-linux-gnueabi"
COMMON_FLAGS="-O2 -march=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=hard -pipe -fomit-frame-pointer"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Note
This ARM core (equipped with the optional vfpv3d16 FPU but missing the NEON extension) is used in the Toshiba AC100/Dynabook AZ/Compal Paz00 Board.
ARMv8-A/BCM2837
Note
This is the Broadcom chip used in the Raspberry Pi 3 Model B.
AArch32 with neon FPU processor : 0-3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : BCM2709
Revision : 0000
Serial : 0000000000000000
|
FILE /etc/portage/make.conf CHOST="armv7a-hardfloat-linux-gnueabi"
COMMON_FLAGS="-O2 -pipe -march=armv7-a -mfpu=neon-vfpv4 -mfloat-abi=hard"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
AArch64 processor : 0-3
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=armv8-a+crc -mtune=cortex-a53 -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
ARM11
ARMv6/ARM1176JZF-S
processor : 0
model name : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS : 697.95
Features : half thumb fastmult vfp edsp java tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb76
CPU revision : 7
Hardware : BCM2835
Revision : 0000
Serial : 000000000XXXXXXX
|
FILE /etc/portage/make.conf CHOST="armv6j-hardfloat-linux-gnueabi"
COMMON_FLAGS="-O2 -pipe -mcpu=arm1176jzf-s -mfpu=vfp -mfloat-abi=hard"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Note
This ARM core is used in the first generation of the Raspberry Pi.
ARMv6/ARM1136JF-S
Processor : ARMv6-compatible processor rev 5 (v6l)
BogoMIPS : 791.34
Features : swp half thumb fastmult vfp edsp java
CPU implementer : 0x41
CPU architecture: 6TEJ
CPU variant : 0x1
CPU part : 0xb36
CPU revision : 5
Hardware : IMAPX200
Revision : 0000
Serial : 0000000000000000
|
FILE /etc/portage/make.conf CHOST="armv6j-hardfloat-linux-gnueabi"
COMMON_FLAGS="-Os -mcpu=arm1136jf-s -mfpu=vfp -mfloat-abi=hard -pipe -fomit-frame-pointer"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
PowerPC / PowerPC 64
Important
-march=
is not supported on the PowerPC (and RS/6000) instruction set architecture (ISA). Use -mcpu=
and -mtune=
instead.
Note
Using -mcpu=native
(and/or -mtune=native
) should work on PowerPC but is not recommended due to distcc.
POWER8
processor : 0
cpu : POWER8E (raw), altivec supported
clock : 3026.000000MHz
revision : 2.1 (pvr 004b 0201)
timebase : 512000000
platform : pSeries
model : IBM pSeries (emulated by qemu)
machine : CHRP IBM pSeries (emulated by qemu)
|
FILE /etc/portage/make.conf COMMON_FLAGS="-mcpu=power8 -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
Cell
processor : 0
cpu : Cell Broadband Engine, altivec supported
clock : 3192.000000MHz
revision : 5.1 (pvr 0070 0501)
processor : 1
cpu : Cell Broadband Engine, altivec supported
clock : 3192.000000MHz
revision : 5.1 (pvr 0070 0501)
timebase : 79800000
platform : PS3
model : SonyPS3
|
FILE /etc/portage/make.conf COMMON_FLAGS="-mcpu=cell -O2 -pipe -mabi=altivec -maltivec -mno-string -mno-multiple"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
NoteGCC's -mspe and -mabi=spe options are not targetting PS3 systems and IBM Cell. Instead, those options are dedicated to IBM e500. More info:
PPC 970 (G5)
Compatible processors are IBM PPC970, PPC970FX, PPC970MP and PPC970GX.
cpu : PPC970, altivec supported
clock : 1800MHz
revision : 2.2 (pvr 0039 0202)
bogomips : 1127.21
machine : PowerMac7,2
motherboard : PowerMac7,2 MacRISC4 Power Macintosh
board revision : 00000001
detected as : 336 (PowerMac G5)
pmac flags : 00000000
L2 cache : 512K unified
pmac-generation : NewWorld
|
FILE /etc/portage/make.conf COMMON_FLAGS="-mcpu=970 -O2 -maltivec -mabi=altivec -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
G4 (PPC 74xx)
PPC 7450 family
Compatible processors are Motorola/Freescale MPC7450, MPC7440, MPC7451, MPC7441, MPC7455, MPC7445, MPC7457, MPC7447, MPC7447/A, and MPC7448.
processor : 0
cpu : 7447A, altivec supported
clock : 1666.666000MHz
revision : 1.5 (pvr 8003 0105)
bogomips : 33.28
timebase : 8320000
platform : PowerMac
model : PowerBook5,9
machine : PowerBook5,9
motherboard : PowerBook5,9 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 17")
pmac flags : 00000018
L2 cache : 512K unified
pmac-generation : NewWorld
|
FILE /etc/portage/make.conf COMMON_FLAGS="-mcpu=7450 -O2 -maltivec -mabi=altivec -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
PPC 7400 family
Compatible processors are Motorola MPC7400 and MPC7410. Note: IBM manufactured the MPC7400 as 06K5319 and 10K8298 when Motorola was not able to fulfill Apple's demands.
processor : 0
cpu : 7400, altivec supported
clock : 400.000000MHz
revision : 2.9 (pvr 000c 0209)
bogomips : 49.66
timebase : 24908583
platform : PowerMac
machine : PowerMac3,1
motherboard : PowerMac3,1 MacRISC Power Macintosh
detected as : 65 (PowerMac G4 AGP Graphics)
pmac flags : 00000004
L2 cache : 1024K unified
pmac-generation : NewWorld
|
FILE /etc/portage/make.conf COMMON_FLAGS="-mcpu=7400 -O2 -maltivec -mabi=altivec -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
G3 (PPC 7XX)
Compatible processors are Motorola/Freescale MPC750, MPC740, MPC755 and MPC745 as well as IBM PPC750, PPC740, PPC750L, PPC740L, PPC750CX, PPC750CXe, PPCDBK ("Gekko"), PPC750FX, PPC750GX, PPC750CXr, PPC750CL ("Broadway"), PPC750GL and PPC750FL. The BAE Systems RAD750 is a radiation hardened variant of the PPC750. The "Espresso" (following the "Gekko" and "Broadway") is also based on the PPC750.
For CPUs for embedded systems such as the Gekko (PPCDBK, used in the Nintendo GameCube) additional CFLAGS (like -meabi
) will be required.
processor : 0
cpu : 740/750
clock : 400.000000MHz
revision : 131.0 (pvr 0008 8300)
bogomips : 49.93
timebase : 24966218
platform : PowerMac
model : PowerBook3,1
machine : PowerBook3,1
motherboard : PowerBook3,1 MacRISC2 MacRISC Power Macintosh
detected as : 70 (PowerBook Pismo)
pmac flags : 0000001f
L2 cache : 1024K unified
pmac-generation : NewWorld
|
FILE /etc/portage/make.conf COMMON_FLAGS="-mcpu=750 -Os -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
RISC-V
processor : 0
hart : 1
isa : rv64imafdc
mmu : sv39
uarch : sifive,u74-mc
|
FILE /etc/portage/make.conf COMMON_FLAGS="-march=rv64imafdc_zicsr_zba_zbb -mcpu=sifive-u74 -mtune=sifive-7-series -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
|
See also
External resources