Sparc/Multilib

From Gentoo Wiki
< Sparc
Jump to:navigation Jump to:search

This guide will help you to migrate your existing Gentoo Linux SPARC installation from a non-multilib profile to a multilib profile.

Overview

This guide will help you to migrate your existing Gentoo Linux SPARC installation from a non-multilib profile to a multilib profile.

Important
Multilib is still experimental, do not use it if you have to rely on a fully working machine.

Multilib has advantages but it also has some disadvantages, these are the facts:

Advantages
  • You can compile and run 64-bit binaries
  • GCC can handle -m32 and -m64 (biarch)
  • One compiler for both kernel and userland
 Drawbacks
  • Compiling GCC takes twice as long as it did before
  • Compiling glibc takes twice as long as it did before

Migration

Update the make.profile symlink

Because the profile is still in an experimental state you have to create/change the /etc/make.profile symlink manually.

The multilib profile also provides these three sub-profiles for your convenience, just like 2008.0 does:

  • desktop
  • developer
  • server
root #rm /etc/make.profile
root #ln -s /usr/portage/profiles/default/linux/sparc/experimental/multilib /etc/make.profile

or

root #ln -s /usr/portage/profiles/default/linux/sparc/experimental/multilib/desktop /etc/make.profile

or

root #ln -s /usr/portage/profiles/default/linux/sparc/experimental/multilib/developer /etc/make.profile

or

root #ln -s /usr/portage/profiles/default/linux/sparc/experimental/multilib/server /etc/make.profile

Confirm that you read this guide

If someone would switch to the multilib profile without reading this guide, their system would break. To prevent that you need to confirm that you read this by adding I_READ_THE_MULTILIB_MIGRATION_GUIDE to the end of your /etc/make.conf.

FILE /etc/make.confEdit make.conf
I_READ_THE_MULTILIB_MIGRATION_GUIDE="yes"

Rename lib to lib32

Though it is not fully compliant with FHS, common practice in Gentoo is to store 32-bit libraries in lib32, 64-bit libraries in lib64 and to have lib as a symlink to the default library directory.

The 2008.0 profile stores libraries in lib. These commands will rename all lib directories to lib32 and create a symlink lib to lib32. Additionally they will create empty lib64 directories.

Warning
Do not exit your shell while doing this! You would not be able to login again and would have to boot a LiveCD to recover.
CODE Rename lib to lib32
$ mv /lib /lib32
# sln is a statically linked version of ln
$ sln lib32 /lib
$ mkdir -p /lib64
$ touch /lib64/.keep
$ for dir in /usr/qt/*/lib /usr/kde/*/lib /usr/local/lib /usr/lib
  do
    if [ -d ${dir} ]
    then
      mv ${dir} ${dir}32
      ln -sf lib32 ${dir}
      mkdir -p ${dir}64
      touch ${dir}64/.keep
    fi
  done
$ ldconfig

Remerge baselayout

For multilib profiles, sys-apps/baselayout installs additional files, like /etc/env.d/04multilib. To get these you need to remerge it.

root #emerge --ask --oneshot sys-apps/baselayout
root #env-update && source /etc/profile

Install a multilib glibc

To compile a multilib glibc you need a biarch gcc but to compile a biarch gcc you need a multilib glibc. You could compile glibc using a cross-compiler such as sys-devel/kgcc64 but that is not something you would enjoy...

Therefore we will install a binary packages of glibc first and afterwards, once the migration is complete, remerge it with your USE- and CFLAGS.

root #PKGDIR="`mktemp -d`" PORTAGE_BINHOST="http://dev.gentoo.org/~bluebird/sparc-multilib/packages" emerge --getbinpkgonly --usepkgonly --oneshot sys-libs/glibc
Note
We set PKGDIR to a temporary directory to avoid picking up local PKGs

If you get All ebuilds that could satisfy sys-libs/glibc have been masked. try using a different version of glibc, these two are available as binary packages:

Install a biarch GCC

With a multilib glibc installed you can simply compile a biarch GCC using portage.

root #emerge --ask --oneshot sys-devel/gcc

Now you need to configure your system to use the newly installed GCC using gcc-config. Replace 4.3.2 with the version you just installed.

root #gcc-config sparc-unknown-linux-gnu-4.3.2
root #source /etc/profile

Remerge glibc with your preferred settings

Remerge glibc with your system specific settings (USE-flags, CFLAGS and such).

root #emerge --ask --oneshot sys-libs/glibc

If the glibc compilation finishes without any strange error messages it means that your multilib setup is working. You can use file to verify this by checking the contents of /lib64.

user $file /lib64/libc-*.so 
/lib64/libc-2.7.so: ELF 64-bit MSB shared object, SPARC V9, version 1 (SYSV), for GNU/Linux 2.6.9, stripped

Unmerge kgcc64

sys-devel/gcc can compile the kernel now, therefore you don't need sys-devel/kgcc64 anymore to do it. If you have some scripts that need it, just replace sparc64-unknown-linux-gnu-gcc with sparc-unknown-linux-gnu-gcc -m64.

root #emerge --ask --depclean --verbose sys-devel/kgcc64

Remerge world

Note
This step is optional.

Your system was build with lib as library directory, now it is lib32. Though you will not notice anything because there is a symlink in place but if you have a lot of spare CPU time and like your system clean...

Or in other words: If you are one of those guys who uses Portage's multilib-strict feature just for the fun of it...this is for you!

root #emerge --ask --emptytree world

Closing-off

Usage example

Here's a simple example how to compile a hello world program in both 32 and 64-bit.

CODE Sample hello world program, hello_world.c
#include <stdio.h>
#include <stdlib.h>

int main(int argc, char** argv) {
  printf("hello, world\n");
  return EXIT_SUCCESS;
}

Compile it as 32-bit binary:

user $sparc-unknown-linux-gnu-gcc -m32 -o hello_world hello_world.c

or

user $sparc-unknown-linux-gnu-gcc -o hello_world hello_world.c
Note
If you specify neither -m32 nor -m64 the compiler will default to -m32.

Compile it as 64-bit binary:

user $sparc-unknown-linux-gnu-gcc -m64 -o hello_world hello_world.c

Things you should not do

So now you have a multilib installation and you are thinking about adding -m64 to CFLAGS in /etc/make.conf and recompiling your entire userland in 64-bit? PLEASE DO NOT!

Warning
Doing this will render your system unusable! Any bugs you report will just be closed without any further action.

While compiling everything in 64-bit may be a good idea on other 64-bit architectures, like amd64, on sparc it is not. There are good reasons why we have been using a pure 32-bit userland until now, some of these are:

  • 32-bit is faster than 64-bit
  • 32-bit is well tested, 64-bit is not tested at all
  • 2039 is still long way off

The only reasons why it might be appropriate to compile an application in 64-bit are:

  • It needs to access more than 4GB of memory. In the real world this only applies to huge databases.
  • It needs to talk to the kernel directly. Some applications, like net-firewall/iptables, contain ugly hacks to support the 64-bit kernel/32-bit userland thing.
  • It is a kernel.

If you would like to read more about the differences between 32 and 64-bit, there are dozens of webpages about it on the internet, one of them is http://www.superlogic.net/downloads/pub/docs/64bit.htm.

Acknowledgements

We would like to thank the following authors and editors for their contributions to this guide:

  • bluebird
Retrieved from "https://wiki.gentoo.org/index.php?title=Sparc/Multilib&oldid=1270522"