Sway

From Gentoo Wiki
Jump to:navigation Jump to:search
Other languages:

Sway (contracted from SirCmpwn's Wayland compositor) is an open-source wlroots-based Wayland compositor that is designed to be compatible with the i3 window manager.

Installation

USE flags

USE flags for gui-wm/sway i3-compatible Wayland window manager

+filecaps Use Linux file capabilities to control privilege rather than set*id (this is orthogonal to USE=caps which uses capabilities at runtime e.g. libcap)
+man Build and install man pages
+swaybar Install 'swaybar': sway's status bar component
+swaynag Install 'swaynag': shows a message with buttons
X Enable support for X11 applications (XWayland)
tray Enable support for StatusNotifierItem tray specification
wallpapers Install sway's default wallpaper image
Data provided by the Gentoo Package Database · Last update: 2024-05-25 14:55 More information about USE flags

Emerge

root #emerge --ask gui-wm/sway

Configuration

To view all available configuration options:

user $man 5 sway

Files

Each user running sway can edit the default configuration file in order to run a customized sway session. Gentoo stores this file at its default /etc/sway/config location:

user $mkdir -p ~/.config/sway/
user $cp /etc/sway/config ~/.config/sway/

Terminal emulator

By default the Sway configuration file uses the foot terminal emulator (found in the gui-apps/foot package). It is a good idea to emerge this terminal emulator so that a terminal will be available once Sway is running:

root #emerge --ask gui-apps/foot

Other popular choices include x11-terms/alacritty or x11-terms/kitty, which works natively with Wayland if the KITTY_ENABLE_WAYLAND environment variable is set to 1.

Another very lightweight alternative is st, but it isn't Wayland native.

Display configuration

Display options can be queried with:

user $swaymsg -t get_outputs
Output DP-1 'HP Inc. HP X34 6CM2261GK2' (focused)
  Current mode: 3440x1440 @ 165.000 Hz
  Position: 0,0
  Scale factor: 1.000000
  Scale filter: nearest
  Subpixel hinting: unknown
  Transform: normal
  Workspace: 1
  Max render time: off
  Adaptive sync: disabled
  Available modes:
    3440x1440 @ 165.000 Hz
 
...
 
Output DP-2 'LG Electronics LG HDR QHD 110NTTQ0U193'
  Current mode: 2560x1440 @ 59.951 Hz
  Position: 3440,0
  Scale factor: 1.000000
  Scale filter: nearest
  Subpixel hinting: unknown
  Transform: normal
  Workspace: 2
  Max render time: off
  Adaptive sync: disabled
  Available modes:
    2560x1440 @ 59.951 Hz
    2560x1440 @ 74.971 Hz
 
...
 
Output DP-3 'Ancor Communications Inc VE247 E3LMQS103610'
  Current mode: 1920x1080 @ 60.000 Hz
  Position: 6000,0
  Scale factor: 1.000000
  Scale filter: nearest
  Subpixel hinting: unknown
  Transform: normal
  Workspace: 3
  Max render time: off
  Adaptive sync: disabled
  Available modes:
    1920x1080 @ 60.000 Hz

The results have been shortened to only contain the desired resolution. The default positions are not configured properly, and can be adjusted by modifying ~/.config/sway/config. Once the file is saved, the configuration can be reloaded with $mod+Shift+C

FILE ~/.config/sway/configConfigure the left display which is physically slightly larger than the primary display
output DP-1 resolution 3440x1440@165hz pos 2560 350
FILE ~/.config/sway/configConfigure primary display which is centered
output DP-2 resolution 2560x1440@74.971hz pos 0 250
FILE ~/.config/sway/configConfigure alternate display which is vertical
output DP-3 resolution 1920x1080@60hz pos 6000 0 transform 270

Input Devices

Input devices can be queried with:

user $swaymsg -t get_inputs
Input device: Logitech G502 HERO Gaming Mouse Keyboard
  Type: Mouse
  Identifier: 1133:49291:Logitech_G502_HERO_Gaming_Mouse_Keyboard
  Product ID: 49291
  Vendor ID: 1133
  Libinput Send Events: enabled
 
Input device: Logitech G502 HERO Gaming Mouse Keyboard
  Type: Keyboard
  Identifier: 1133:49291:Logitech_G502_HERO_Gaming_Mouse_Keyboard
  Product ID: 49291
  Vendor ID: 1133
  Active Keyboard Layout: English (US)
  Libinput Send Events: enabled
 
Input device: Logitech G502 HERO Gaming Mouse
  Type: Mouse
  Identifier: 1133:49291:Logitech_G502_HERO_Gaming_Mouse
  Product ID: 49291
  Vendor ID: 1133
  Libinput Send Events: enabled
FILE ~/.config/sway/configDisable mouse acceleration, decrease pointer speed
input "1133:49291:Logitech_G502_HERO_Gaming_Mouse" {
    accel_profile "flat"
    pointer_accel -0.1
}
FILE ~/.config/sway/configEnable touchpad tap to click
input type:touchpad {
    tap enabled
}
Tip
Tapping with 1 finger left clicks, 2 right clicks, and 3 middle clicks. This can be adjusted with tap_button_map.

Application launcher

Sway works with a variety of application launchers. By default it attempts to use wmenu but also requires dmenu for dependencies, so requires reconfiguration to use with any Wayland native launchers.

bemenu

To install and configure sway to use gui-apps/bemenu:

root #emerge --ask gui-apps/bemenu
FILE ~/.config/sway/configConfigure sway to use bemenu.
set $menu bemenu-run --no-exec | xargs -r swaymsg exec --
FILE ~/.config/sway/configConfigure sway to use bemenu, with an empty prompt.
set $menu bemenu-run --no-exec -p "" | xargs -r swaymsg exec --
Tip
--line-height (-H) can be set to 26 to make the bemenu height match waybar.

wmenu

By default sway tries to use gui-apps/wmenu, which can be installed with:

root #emerge --ask gui-apps/wmenu
Note
The default configuration attempts to use dmenu_path which is part of the x11-misc/dmenu package.

To configure sway to simply use wmenu:

FILE ~/.config/sway/configConfigure Sway to use wmenu
set $menu wmenu-run | xargs swaymsg exec --
FILE ~/.config/sway/configConfigure Sway to use wmenu with no prompt
set $menu wmenu-run -p "" | xargs swaymsg exec --

Status bar

In addition to Sway's own status bar, Waybar can be used as a highly customizable status bar for Sway:

root #emerge --ask gui-apps/waybar

There are two simple ways to enable Waybar in Sway: executing Waybar as a bar subcommand, or as a regular command. Both will behave the same when Sway starts up (and when Sway exits and starts up again), but they differ in the reloading of Sway. Executing Waybar, or any other status bar, as a bar subcommand will restart the status bar on Sway reload. Executing Waybar as a regular command will not restart the status bar on Sway reload; executing with exec_always instead of exec does not solve this, it only makes more status bars on each Sway reload.

Users that wish to quickly test their status bar configurations via a Sway reload should use the bar subcommand method.

FILE ~/.config/sway/configEnable Waybar via a bar subcommand
bar {
        # Execute Waybar; Waybar restarts when Sway reloads.
        status_command waybar
 
        # Hide Sway's builtin status bar.
        mode invisible
}
FILE ~/.config/sway/configEnable Waybar via a regular command
# Execute Waybar; Waybar does not restart when Sway reloads.
exec waybar

Brightness

There are several options for adjusting the backlight brightness, it can even be done by writing to /sys/class/backlight/<device>/brightness.

acpilight

Alternatively, sys-power/acpilight can also accomplish the same brightness changes via a xbacklight compatible command:

FILE ~/.config/sway/configSet the keyboard shortcuts for screen brightness support
bindsym XF86MonBrightnessDown exec xbacklight -dec 2
bindsym XF86MonBrightnessUp exec xbacklight -inc 4

brightnessctl

app-misc/brightnessctl is in ::guru and can be used to simply adjust the backlight:

FILE ~/.config/sway/configAdd brightnessctl keybinds
bindsym XF86MonBrightnessDown exec brightnessctl set 5%-
bindsym XF86MonBrightnessUp exec brightnessctl set 5%+

light

Warning
The github page for dev-libs/light currently (2023-09) states: "This project is considered orphaned since the 8th of March, 2023. Use is heavily discouraged until such a time that it is adopted by another developer.". The package currently remains in the Gentoo ebuild repository, but users may want to take the message from the dev into consideration.

dev-libs/light can be used to adjust backlights and brightness. Here is an example config:

FILE ~/.config/sway/configSet the keyboard shortcuts for screen brightness support
bindsym XF86MonBrightnessDown exec light -U 2
bindsym XF86MonBrightnessUp exec light -A 4

Notification

gui-apps/mako can be used as a notification daemon.

FILE ~/.config/sway/configLaunch mako daemon when Sway starts
exec mako

Sound volume

The XF86AudioRaiseVolume and XF86AudioLowerVolume keycode are generally present and used to adjust the system volume. This must be bound and set depending on the audio backend.

Pipewire

If PipeWire is being used, the following configuration can be used for changing sound volume (with Wireplumber):

FILE ~/.config/sway/configSet the keyboard shortcuts to change sound volume for PipeWire
bindsym XF86AudioRaiseVolume exec wpctl set-volume @DEFAULT_SINK@ 5%+
bindsym XF86AudioLowerVolume exec wpctl set-volume @DEFAULT_SINK@ 5%-

Pulseaudio

If pulseaudio is being used, the following configuration can be used for changing sound volume:

FILE ~/.config/sway/configSet the keyboard shortcuts to change sound volume for pulseaudio
bindsym XF86AudioRaiseVolume exec pactl set-sink-volume @DEFAULT_SINK@ +5%
bindsym XF86AudioLowerVolume exec pactl set-sink-volume @DEFAULT_SINK@ -5%

ALSA

If ALSA is being used, the following configuration can be used for changing the sound volume:

FILE ~/.config/sway/configSet the keyboard shortcuts to change sound volume for ALSA
bindsym XF86AudioRaiseVolume exec amixer -Mq set Speaker 5%+
bindsym XF86AudioLowerVolume exec amixer -Mq set Speaker 5%-

sndio

If media-sound/sndio is being used, the following configuration can be used for changing the sound volume:

FILE ~/.config/sway/configSet the keyboard shortcuts to change sound volume for sndio
bindsym XF86AudioRaiseVolume exec sndioctl -f snd/default output.level=+0.05
bindsym XF86AudioLowerVolume exec sndioctl -f snd/default output.level=-0.05

Taking screenshots

Simple approach: use slurpshot

(Slurpshot) is a script to simplify taking screenshots. It uses native wayland apps only and enables selecting specific windows only, as well as previewing and printing screenshots withous saving them. First install dependencies:

root #emerge --ask gui-apps/grim gui-apps/slurp app-misc/jq dev-libs/bemenu

Put the slurpshot script somewhere in your PATH, for example to ~/bin, make it executable and just set one keybind:

FILE ~/.config/sway/configSet the keyboard shortcuts for slurpshot support
#
# Screen capture
#
bindsym Print exec slurpshot

Manual approach

To add screenshot support, use the grim utility (found in the gui-apps/grim package). The abbreviation grim is defined as Grab Images. This utility is tailored to the specifics of the Wayland protocol. In order to install grim, use the following command:

root #emerge --ask gui-apps/grim

To add support for determining the boundaries of the selected screen area, the slurp utility, found in the gui-apps/slurp package, is used in combination with the grim utility. To install slurp, use the command:

root #emerge --ask gui-apps/slurp

To add clipboard support wl-clipboard is used, found in gui-apps/wl-clipboard. To install wl-clipboard, use the command:

root #emerge --ask gui-apps/wl-clipboard

Next, edit the configuration file to add support for keyboard shortcuts to perform a screenshot operation:

FILE ~/.config/sway/configSet the keyboard shortcuts for screenshot support
#
# Screen capture
#
set $ps1 Print
set $ps2 Control+Print
set $ps3 Alt+Print
set $ps4 Alt+Control+Print
set $psf $(xdg-user-dir PICTURES)/ps_$(date +"%Y%m%d%H%M%S").png
 
bindsym $ps1 exec grim - | wl-copy
bindsym $ps2 exec grim -g "$(slurp)" - | wl-copy
bindsym $ps3 exec grim $psf
bindsym $ps4 exec grim -g "$(slurp)" $psf

Please note that the Print or Ctrl + Print keys combination creates a screenshot in the wl-copy buffer. This allows pasting the image directly from the clipboard, without having to save to a file on disk.

For the Alt + Print or Alt + Ctrl + Print keyboard shortcuts, the method of automatically saving the image file in the Pictures user directory is used.

Snipping tool like behavior

The following captures an area of the screen to the clipboard when mod+shift+S is pressed:

FILE ~/.config/sway/configSimilar function to the snipping tool
bindsym $mod+shift+s exec grim -g "$(slurp)" - | wl-copy
Note
-g tells grim to crop to a region, and $(slurp) obtains the region. The screenshot is output to stdout where wl-copy copies the file to the clipboard.

Set a random wallpaper

A random wallpaper can be pulled from a folder and be set: [1]

FILE ~/.config/sway/configSet a random wallpaper from a folder
set $wallpapers_path $HOME/Pictures/Wallpapers
output * bg $(find $wallpapers_path -type f | shuf -n 1) fill

Swaylock

gui-apps/swaylock can be used to lock the current session.

root #emerge --ask gui-apps/swaylock
FILE ~/.config/sway/configLock the session when $mod+l is pressed
bindsym $mod+l exec swaylock --ignore-empty-password --show-failed-attempts --color 1e1e1e
FILE ~/.config/sway/configWith colors man swaylock for more info
bindsym $mod+l exec swaylock --ignore-empty-password --show-failed-attempts \
    --color 1e1e1e --inside-color cccccc --ring-color ffffff \
    --inside-clear-color 11a8cd --ring-clear-color 29b8db \
    --inside-ver-color 2472c8 --ring-ver-color 3b8eea \
    --inside-wrong-color cd3131 --ring-wrong-color f14c4c
Warning
If the account is locked out, swaylock will not indicate this, and will simply fail. Switching to another TTY and attempting login can help diagnose this

Swayidle

gui-apps/swayidle runs a command after a certain idle time, typically to lock and/or power off the screen.

root #emerge --ask gui-apps/swayidle
FILE ~/.config/sway/configPower off all displays after 15 minutes of idle
exec swayidle -w \
  timeout 900 'swaymsg "output * power off"' \
  resume 'swaymsg "output * power on"'

HiDPI

To adjust sway's rendering for HiDPI displays (4K and above), the name of the display to be adjusted must be obtained. After a sway session is running, issue the following:

user $swaymsg -t get_outputs
Note
The swaymsg USE flag must be enabled for the swaymsg command to be available on the system.

The output statement in the sway configuration file will accept a scale parameter to adjust the scaling of the high resolution display.

Xresources

FILE ~/.config/sway/configReload ~/.Xresources on sway reload
exec_always test -f ~/.Xresources && xrdb -merge ~/.Xresources

GTK configuration

Dark Mode

GTK3

GTK3 dark mode can be enabled by setting:

FILE ~/.config/gtk-3.0/config.iniEnable gtk3 dark mode
[Settings]
gtk-application-prefer-dark-theme = true
GTK2

GTK2 does not have a dark mode toggle, a dark theme must be selected:

FILE ~/.gtkrc-2.0Enable gtk3 dark mode
gtk-theme-name = "Adwaita-dark"

GTK3 Themes and Fonts

Currently setting a GTK font and theme should be done by editing sway's configuration file (see Sway's wiki as well):

FILE ~/.config/sway/configSet the font and theme for GTK applications
set $gnome-schema org.gnome.desktop.interface
exec_always {
    gsettings set $gnome-schema gtk-theme 'theme name'
    gsettings set $gnome-schema icon-theme 'icon theme name'
    gsettings set $gnome-schema cursor-theme 'cursor theme name'
    gsettings set $gnome-schema font-name 'Sans 10'
}

If encountering problems setting the mouse cursor with certain applications (including sway), this may help:

FILE ~/.config/sway/configSet the cursor theme
seat seat0 xcursor_theme custom_cursor_theme custom_cursor_size

Replace custom_cursor_theme and custom_cursor_size. Adwaita and 24 are pretty much default on all Linux distributions.

Automatic floating windows

By default, Sway opens new windows in tiling mode. The following configuration snippet makes many common windows which should float, float:

FILE ~/.config/sway/configMore reasonable floating windows[2]
for_window [window_role = "pop-up"] floating enable
for_window [window_role = "bubble"] floating enable
for_window [window_role = "dialog"] floating enable
for_window [window_type = "dialog"] floating enable
for_window [window_role = "task_dialog"] floating enable
for_window [window_type = "menu"] floating enable
for_window [app_id = "floating"] floating enable
for_window [app_id = "floating_update"] floating enable, resize set width 1000px height 600px
for_window [class = "(?i)pinentry"] floating enable
for_window [title = "Administrator privileges required"] floating enable

Firefox Tweaks

FILE ~/.config/sway/configMake relevant Firefox windows float[3]
for_window [title = "About Mozilla Firefox"] floating enable
for_window [window_role = "About"] floating enable
for_window [app_id="firefox" title="Library"] floating enable, border pixel 1, sticky enable
FILE ~/.config/sway/configRemove the sharing indicator window for Firefox[4]
for_window [title = "Firefox - Sharing Indicator"] kill
for_window [title = "Firefox — Sharing Indicator"] kill

Steam Tweaks

FILE ~/.config/sway/configMake Steam dialog windows float[5]
for_window [class="^Steam$" title="^Friends$"] floating enable
for_window [class="^Steam$" title="Steam - News"] floating enable
for_window [class="^Steam$" title=".* - Chat"] floating enable
for_window [class="^Steam$" title="^Settings$"] floating enable
for_window [class="^Steam$" title=".* - event started"] floating enable
for_window [class="^Steam$" title=".* CD key"] floating enable
for_window [class="^Steam$" title="^Steam - Self Updater$"] floating enable
for_window [class="^Steam$" title="^Screenshot Uploader$"] floating enable
for_window [class="^Steam$" title="^Steam Guard - Computer Authorization Required$"] floating enable
for_window [title="^Steam Keyboard$"] floating enable

Service

OpenRC

On OpenRC based systems, elogind must be added to the boot runlevel:

root #rc-update add elogind boot

Usage

Starting Sway

Tip
Although not officially supported, some display managers may work with sway.[6]
Important
Starting Sway with dbus requires that XDG_RUNTIME_DIR is set. elogind or systemd will set this if used. Omitting the dbus-run-session may cause runtime errors.
See also
Starting Sway without elogind.

Launching Sway automatically with TTY login

To start Sway on login to the first TTY:

FILE ~/.bashrcLaunch Sway after logging into the first TTY
if [ -z "${WAYLAND_DISPLAY}" ] && [ "${XDG_VTNR}" -eq 1 ]; then
    dbus-run-session sway
fi
Automatic login on tty1

To enable automatic login on tty1, --skip-login and --login-options can be added to tty1's agetty instance defined in /etc/inittab:

FILE /etc/inittabAutomatically login as Larry on tty1
c1:12345:respawn:/sbin/agetty --noclear 38400 tty1 linux --skip-login --login-options larry

Starting Sway manually

user $dbus-run-session sway

Launching Sway from a script

This method uses a script to forcibly take over a virtual terminal and launch Sway in it. The typical use case is to launch Sway automatically on boot.

Note
Sway is not supposed to be launched this way, the script may need some tuning to work.
FILE /usr/sbin/sway_launcherSway Launcher
#!/bin/sh
 
# Launch sway with a specific user, from a specific Virtual Terminal (vt)
# Two arguments are expected: a username (e.g., larry) and the id of a free vt (e.g., 7)
 
# prepare the tty for the user. vtX uses /dev/ttyX
chown "$1" "/dev/tty${2}"
chmod 600 "/dev/tty${2}"
 
# setup a clean environment for the user, take over the target vt, then launch sway
su --login --command "openvt --switch --console ${2} -- sway >\${HOME}/.sway_autolauncher.log 2>&1" "$1"
# this script returns immediately

This script has a few limitations:

  • XDG_RUNTIME_DIR is expected to be defined and valid, see the section above.
  • Without the --switch option for openvt, sway will freeze when trying to switch to a different VT (Ctrl+Alt+Fn), whether this is a bug or not is unknown.
  • The VT is not cleared when Sway exits, clear it by calling deallocvt.
  • Similarly the TTY's owner and mode are not changed back to their default values when Sway exits.

Launching this script on boot can be done with the local service:

FILE /etc/local.d/sway.startLaunch Sway on boot
#!/bin/sh
sway_launcher larry 7

Starting Sway without elogind or systemd

Systems that are configured with neither systemd nor elogind will need to create a shell script (or use some other means) to set the XDG_RUNTIME_DIR variable.

The environment variable can be defined in the usual configuration files. For example, if Larry the cow (Larry) sets the XDG_RUNTIME_DIR variable in his shell's configuration file and he has chosen that the directory will be in /tmp:

FILE /home/larry/.bash_profileSet the XDG_RUNTIME_DIR variable
#!/bin/sh
if test -z "${XDG_RUNTIME_DIR}"; then
  export XDG_RUNTIME_DIR=/tmp/"${UID}"-runtime-dir
    if ! test -d "${XDG_RUNTIME_DIR}"; then
        mkdir "${XDG_RUNTIME_DIR}"
        chmod 0700 "${XDG_RUNTIME_DIR}"
    fi
fi

With the XDG_RUNTIME_DIR defined, sway can be launched as usual:

user $dbus-run-session sway

If issues are encountered, check Sway issues on GitHub before contacting the Sway community on IRC (#sway (webchat)) or opening a new Gentoo bug.

Movement

All key combinations will be defined in the ~/.config/sway/config configuration file.

The Super key is defined as the $mod value by default. On most keyboards this will be the Windows key.

Sway has a Vi-like interface. h (left), j (down), k (up), and l (right) can be used for movement, in addition to the arrow keys.

Focus can be moved with mod+direction key, windows can be moved with mod+shift+direction key:

FILE ~/.config/sway/configDefault movement definitions
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
 
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

See man 5 sway-input for more information.

Useful binds

FILE ~/.config/sway/configCycle between workspaces with mod+control+left arrow and mod+control+right arrow
bindsym $mod+control+Right workspace next
bindsym $mod+control+Left workspace prev

Layouts

By default, Sway uses a tiling layout. Layout modes can be switched with the following default binds:

  • mod+b - Horizontal split
  • mod+v - Vertical split
  • mod+s - Stacking
  • mod+w - Tabbed
  • mod+e - Toggle split
  • mod+shift+space - Toggle floating
FILE ~/.config/sway/configDefault layout definitions
bindsym $mod+b splith
bindsym $mod+v splitv
 
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
 
bindsym $mod+Shift+space floating toggle

Terminal

The default key combination to open a terminal emulator is $mod+Enter.

Foot Server

Foot is a minimal Wayland terminal emulator that can be configured to run as a server, reducing resource usage.

FILE ~/.config/sway/configStart the Foot server with Sway
exec foot -s
FILE ~/.config/sway/configSet the default terminal to be a foot client
set $term footclient
Note
If starting the foot server with Sway, it may not start fast enough to also auto-start a service, exec swaymsg "workspace 2; exec $term {command}" may be slow enough to mitigate this

Adding features

Sway is designed to be extended, adding additional features is easy:

FILE ~/.config/sway/configStart htop when control+shift+esc is pressed
bindsym control+shift+escape exec $term htop

If using foot, the app_id, which is set with -a, can be set to make it float automatically:

FILE ~/.config/sway/configStart htop floating when control+shift+esc is pressed
bindsym control+shift+escape exec $term -a 'flying-foot' htop
for_window [app_id="flying-foot"] floating enable

Moving left and right with non-existing workspaces

Sway can switch to the left (prev) or right (next) workspace as long as there exists a workspace to switch to in that direction; this includes moving containers to those workspaces:

FILE ~/.config/sway/config
set $super mod4
bindsym $super+alt+left  workspace prev
bindsym $super+alt+right workspace next
bindsym $super+control+alt+left  move container to workspace prev, workspace prev
bindsym $super+control+alt+right move container to workspace next, workspace next

To be able to switch to non-existing workspaces, we can create a script to tell Sway to switch to a specific workspace:

FILE ~/.config/sway/config
set $super             mod4
set $num_of_workspaces 10
bindsym $super+alt+left          exec swaymsg -pt get_workspaces | gawk -f ~/.config/sway/workspace.gawk -v move_type="left"  -v num_of_workspaces=$num_of_workspaces
bindsym $super+alt+right         exec swaymsg -pt get_workspaces | gawk -f ~/.config/sway/workspace.gawk -v move_type="right" -v num_of_workspaces=$num_of_workspaces
bindsym $super+control+alt+left  exec swaymsg -pt get_workspaces | gawk -f ~/.config/sway/workspace.gawk -v move_type="container_left"  -v num_of_workspaces=$num_of_workspaces
bindsym $super+control+alt+right exec swaymsg -pt get_workspaces | gawk -f ~/.config/sway/workspace.gawk -v move_type="container_right" -v num_of_workspaces=$num_of_workspaces
FILE ~/.config/sway/workspace.gawk
#!/bin/gawk -f
 
$3 == "(focused)" {
	switch(move_type) {
	case "left":
		if ($2 == 1)
			$2=num_of_workspaces+1
		system("sway workspace "$2-1)
		exit
	
	case "right":
		if ($2 == num_of_workspaces)
			$2=0
		system("sway workspace "$2+1)
		exit
	
	case "container_left":
		if ($2 == 1)
			$2=num_of_workspaces+1
		system("sway move container to workspace "$2-1", workspace "$2-1)
		exit
	
	case "container_right":
		if ($2 == num_of_workspaces)
			$2=0
		system("sway move container to workspace "$2+1", workspace "$2+1)
		exit
	}
}

Troubleshooting

Screen sharing does not work

Make sure the package gui-libs/xdg-desktop-portal-wlr is installed. By default, it is autostarted by D-Bus but it fails to run because it needs environment variables exported by Sway, and the D-Bus session is started before Sway. To fix, update the D-Bus environment by adding the following line to the beginning of Sway's config:

FILE ~/.config/sway/config
exec --no-startup-id dbus-update-activation-environment --all

Also see this link to see if PipeWire is working properly. Ensure XDG_CURRENT_DESKTOP=sway.

Failed to connect to user bus

[swaybar/tray/tray.c:42] Failed to connect to user bus: No such file or directory

Warning: no icon themes loaded

[swaybar/tray/icon.c:348] Warning: no icon themes loaded

It is looking for x11-themes/hicolor-icon-theme

No backend was able to open a seat

[ERROR] [wlr] [libseat] [libseat/libseat.c:78] No backend was able to open a seat

It is looking for a seat management daemon such as sys-auth/seatd or sys-auth/elogind. Also check whether setting XDG_RUNTIME_DIR is required.

Important
If sys-auth/seatd is used, the server USE flag is required.

Applications forget logins

Some applications (e. g. net-misc/nextcloud-client) use a Secret-Service-Agent to save credentials for login. If applications ask for account credentials every run, an incorrectly configured Secret-Service-Agent might be the reason.

First, emerge gnome-base/gnome-keyring.

root #emerge --ask gnome-base/gnome-keyring

Then, enable the gnome-keyring USE flag.

FILE /etc/portage/package.use
# Sway Secret-Service-Agent
*/* gnome-keyring

Update the system to apply the new USE flag.

root #emerge -avuDN @world

To run and unlock the Agent's storage when logging into a Sway session, edit these two files.

FILE ~/.config/sway/config
exec dbus-update-activation-environment --all
exec gnome-keyring-daemon --start --components=secrets
exec export $(gnome-keyring-daemon)
FILE /etc/pam.d/login
auth      optional  pam_gnome_keyring.so
password  optional  pam_gnome_keyring.so
session   optional  pam_gnome_keyring.so auto_start

See also

  • i3 — a minimalist tiling window manager, completely written from scratch.
  • Wayland — a replacement for the X11 window system protocol and architecture with the aim to be easier to develop, extend, and maintain
  • Weston — a reference implementation of a Wayland compositor.

References

  1. ↑ https://github.com/swaywm/sway/issues/1269
  2. ↑ https://github.com/Madic-/Sway-DE/blob/master/config/sway/sway.d/06_floating.conf
  3. ↑ https://github.com/Madic-/Sway-DE/blob/master/config/sway/sway.d/06_floating.conf
  4. ↑ https://github.com/Madic-/Sway-DE/blob/master/config/sway/sway.d/06_floating.conf
  5. ↑ https://github.com/Madic-/Sway-DE/blob/master/config/sway/sway.d/06_floating.conf
  6. ↑ https://github.com/swaywm/sway#running
Retrieved from "https://wiki.gentoo.org/index.php?title=Sway&oldid=1316267"