User:Zulu Foxtrott/GentooOnARM/EasyInstall/Filesystems

In this section the various file systems that Linux supports are described. Readers that already know which filesystem to use can continue with Applying a filesystem to a partition. The others should read on to learn about the available filesystems...

Filesystems

Linux supports several dozen filesystems, although many of them are only wise to deploy for specific purposes. Only certain filesystems may be found found stable on the architecture - it is advised to read up on the filesystems and their support state before selecting a more experimental one for important partitions.

btrfs: A next generation filesystem that provides many advanced features such as snapshotting, self-healing through checksums, transparent compression, subvolumes, and integrated RAID. Kernels prior to 5.4.y are not guaranteed to be safe to use with btrfs in production because fixes for serious issues are only present in the more recent releases of the LTS kernel branches. Filesystem corruption issues are common on older kernel branches, with anything older than 4.4.y being especially unsafe and prone to corruption. Corruption is more likely on older kernels (than 5.4.y) when compression is enabled. RAID 5/6 and quota groups unsafe on all versions of btrfs. Furthermore, btrfs can counter-intuitively fail filesystem operations with ENOSPC when df reports free space due to internal fragmentation (free space pinned by DATA + SYSTEM chunks, but needed in METADATA chunks). Additionally, a single 4K reference to a 128M extent inside btrfs can cause free space to be present, but unavailable for allocations. This can also cause btrfs to return ENOSPC when free space is reported by df. Installing sys-fs/btrfsmaintenance and configuring the scripts to run periodically can help to reduce the possibility of ENOSPC issues by rebalancing btrfs, but it will not eliminate the risk of ENOSPC when free space is present. Some workloads will never hit ENOSPC while others will. If the risk of ENOSPC in production is unacceptable, you should use something else. If using btrfs, be certain to avoid configurations known to have issues. With the exception of ENOSPC, information on the issues present in btrfs in the latest kernel branches is available at the btrfs wiki status page.

ext2: This is the tried and true Linux filesystem but doesn't have metadata journaling, which means that routine ext2 filesystem checks at startup time can be quite time-consuming. There is now quite a selection of newer-generation journaled filesystems that can be checked for consistency very quickly and are thus generally preferred over their non-journaled counterparts. Journaled filesystems prevent long delays when the system is booted and the filesystem happens to be in an inconsistent state.
ext3: The journaled version of the ext2 filesystem, providing metadata journaling for fast recovery in addition to other enhanced journaling modes like full data and ordered data journaling. It uses an HTree index that enables high performance in almost all situations. In short, ext3 is a very good and reliable filesystem.
ext4: Initially created as a fork of ext3, ext4 brings new features, performance improvements, and removal of size limits with moderate changes to the on-disk format. It can span volumes up to 1 EB and with maximum file size of 16TB. Instead of the classic ext2/3 bitmap block allocation ext4 uses extents, which improve large file performance and reduce fragmentation. Ext4 also provides more sophisticated block allocation algorithms (delayed allocation and multiblock allocation) giving the filesystem driver more ways to optimize the layout of data on the disk. Ext4 is the recommended all-purpose all-platform filesystem.
f2fs: The Flash-Friendly File System was originally created by Samsung for the use with NAND flash memory. As of Q2, 2016, this filesystem is still considered immature, but it is a decent choice when installing Gentoo to microSD cards, USB drives, or other flash-based storage devices.
JFS: IBM's high-performance journaling filesystem. JFS is a light, fast, and reliable B+tree-based filesystem with good performance in various conditions.
ReiserFS: A B+tree-based journaled filesystem that has good overall performance, especially when dealing with many tiny files at the cost of more CPU cycles. ReiserFS version 3 is included in the mainline Linux kernel, but is not recommended to be used when initially installing a Gentoo system. Newer versions of the ReiserFS filesystem exist, however they require additional patching of the mainline kernel to be utilized.
XFS: A filesystem with metadata journaling which comes with a robust feature-set and is optimized for scalability. XFS seems to be less forgiving to various hardware problems, but has been continuously upgraded to include modern features.
VFAT: Also known as FAT32, is supported by Linux but does not support standard UNIX permission settings. It is mostly used for interoperability with other operating systems (Microsoft Windows or Apple's OSX) but is also a necessity for some system bootloader firmware (like UEFI).
NTFS: This "New Technology" filesystem is the flagship filesystem of Microsoft Windows since Windows NT 3.1. Similar to vfat above it does not store UNIX permission settings or extended attributes necessary for BSD or Linux to function properly, therefore it should not be used as a root filesystem. It should only be used for interoperability with Microsoft Windows systems (note the emphasis on only).

When using ext2, ext3, or ext4 on a small partition (less than 8 GiB), then the file system must be created with the proper options to reserve enough inodes. The mke2fs (mkfs.ext2) application uses the "bytes-per-inode" setting to calculate the number of inodes for a file system. On smaller partitions, it is advised to increase the calculated number of inodes.

On ext2, ext3 and ext4, this can be done using one of the following commands, respectively:

root #mkfs.ext2 -T small /dev/<device>

root #mkfs.ext3 -T small /dev/<device>

root #mkfs.ext4 -T small /dev/<device>

This will generally quadruple the number of inodes for a given file system as its "bytes-per-inode" reduces from one every 16kB to one every 4kB. This can be tuned even further by providing the ratio:

root #mkfs.ext2 -i <ratio> /dev/<device>

Applying a filesystem to a partition

To create a filesystem on a partition or volume, there are user space utilities available for each possible filesystem. Click the filesystem's name in the table below for additional information on each filesystem:

Filesystem	Creation command	On minimal CD?	Package
btrfs	mkfs.btrfs	Yes	sys-fs/btrfs-progs
ext2	mkfs.ext2	Yes	sys-fs/e2fsprogs
ext3	mkfs.ext3	Yes	sys-fs/e2fsprogs
ext4	mkfs.ext4	Yes	sys-fs/e2fsprogs
f2fs	mkfs.f2fs	Yes	sys-fs/f2fs-tools
jfs	mkfs.jfs	Yes	sys-fs/jfsutils
reiserfs	mkfs.reiserfs	Yes	sys-fs/reiserfsprogs
xfs	mkfs.xfs	Yes	sys-fs/xfsprogs
vfat	mkfs.vfat	Yes	sys-fs/dosfstools
NTFS	mkfs.ntfs	Yes	sys-fs/ntfs3g

User:Zulu Foxtrott/GentooOnARM/EasyInstall/Filesystems

Filesystems

Applying a filesystem to a partition

Next