Wifi/Testing

Testing

After a reboot with the new kernel or after loading the modules, the device can be checked for availability by using following methods:

• Using the /sys file system
• Using the ip command
• Using the ifconfig command
• Using the iw command

/sys file system

Get the device name by listing the /sys/class/net directory contents using ls -al or the tree command (provided by the app-text/tree package):

user $tree /sys/class/net

/sys/class/net/
├── enp2s14 -> ../../devices/pci0000:00/0000:00:1e.0/0000:02:0e.0/net/enp2s14
├── lo -> ../../devices/virtual/net/lo
├── sit0 -> ../../devices/virtual/net/sit0
└── wlp8s0 -> ../../devices/pci0000:00/0000:00:1c.0/0000:08:00.0/net/wlp8s0

ip command

To obtain the device name and verify that the wireless card is detected, execute the following ip command:

user $ip addr

3: wlan0:   ...

A network card can be activated as follows:

root #ip link set wlan0 up

ifconfig command

The ifconfig command is provided through the sys-apps/net-tools package. Use ifconfig -a to list all detected network cards, even those that are not enabled/active yet:

user $ifconfig -a

wlan0     ...

A network card can be activated as follows:

root #ifconfig -v wlan0 up

SIOCSIFFLAGS: Operation not possible due to RF-kill
WARNING: at least one error occurred. (-1)

In this example, enabling the wireless card failed as a radio frequency kill state is set (usually to keep power consumption at bay and not connect by accident to a wireless network).

iw command

If the wireless network card driver supports the nl80211 stack, then the iw command as offered by the net-wireless/iw package can show the detected wireless cards:

root #iw dev

   phy#0
	Interface wlan0
		ifindex 4
		type managed