HP Zbook Studio G4

From Gentoo Wiki
Jump to:navigation Jump to:search

Hardware

root #lspci -k
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
	Subsystem: Hewlett-Packard Company Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
	Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
	DeviceName: Onboard IGD
	Subsystem: Hewlett-Packard Company HD Graphics 630
	Kernel driver in use: i915
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 05)
	Subsystem: Hewlett-Packard Company Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
	Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
	Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
	Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family Thermal Subsystem
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)
	Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family Serial IO I2C Controller
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
	Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family MEI Controller
00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31)
	Subsystem: Hewlett-Packard Company Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
	Kernel driver in use: ahci
00:1b.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 (rev f1)
	Kernel driver in use: pcieport
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1)
	Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #2 (rev f1)
	Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)
	Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)
	Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation CM238 Chipset LPC/eSPI Controller (rev 31)
	Subsystem: Hewlett-Packard Company CM238 Chipset LPC/eSPI Controller
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
	Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
	Subsystem: Hewlett-Packard Company CM238 HD Audio Controller
	Kernel driver in use: snd_hda_intel
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
	Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family SMBus
	Kernel driver in use: i801_smbus
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-LM (rev 31)
	Subsystem: Hewlett-Packard Company Ethernet Connection (2) I219-LM
	Kernel driver in use: e1000e
01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro M1200 Mobile] (rev a2)
        Subsystem: Hewlett-Packard Company GM107GLM [Quadro M1200 Mobile]
        Kernel driver in use: nvidia
        Kernel modules: nvidia_drm, nvidia
02:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
	Subsystem: Intel Corporation Dual Band Wireless-AC 8265
	Kernel driver in use: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
	Subsystem: Hewlett-Packard Company RTS525A PCI Express Card Reader
	Kernel driver in use: rtsx_pci
6f:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
	Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
	Kernel driver in use: nvme
Device Make/model Status Kernel driver(s)
CPU Intel Core i7-7700HQ Works N/A
Ethernet Intel Corporation Ethernet Connection I219-LM Works e1000e
USB Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller Works xhci_hcd
Video card Intel Corporation HD Graphics 630 Works i915
Video card NVIDIA Quadro M1200 Works nvidia
WiFi Intel Corporation Wireless 8265 / 8275 Works iwlwifi
Sound card Intel Corporation Device a171 Works snd_hda_intel
Hard drive Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 Works nvme
Bluetooth Intel Corporation 0a2b Works N/A
Thunderbolt 3 Intel Corporation Sunrise Point-H PCI Express See troubleshooting pcieport
SD card slot Realtek RTS525A Works rtsx_pci
Webcam HD HP Camera Works uvcvideo

Sound card

root #lspci | grep Audio 
00:1f.3 Audio device: Intel Corporation Device a171 (rev 31)

Be sure to enable HD Audio PCI (snd-hda-intel) and enable the codecs.

KERNEL 
Device Drivers --->
    <*> Sound card support
        <*> Advanced Linux Sound Architecture --->
            HD-Audio  --->
                <*> HD Audio PCI
                [*] Build Realtek HD-audio codec support
                [*] ...
                [*] Build Silicon Labs 3054 HD-modem codec support
                [*] Enable generic HD-audio codec parser
General setup --->
    [*] System V IPC

Thunderbolt 3

Thunderbolt 3 is a hot pluggable PCIe port, with USB 3.1 support.

KERNEL Thunderbolt 3 Support
Bus options (PCI etc.)  --->
    [*] PCI support
    [*]   PCI Express Port Bus support
    [*]     PCI Express Hotplug driver
    [*] Support for PCI Hotplug  --->
    [*]   ACPI PCI Hotplug driver

USB

Easy, just enable xHCI.

KERNEL 
Device Drivers  --->
    [*] USB support  --->
        <*>     xHCI HCD (USB 3.0) support

No need to enable EHCI or OHCI. xHCI is backwards compatible already.

WiFi

root #lspci | grep Network
02:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)

Intel Corporation Wireless 8265 / 8275 does not work out of the box.
Look for the iwlwifi firmware in the /lib/firmware directory.

user $ls /lib/firmware | grep iwlwifi-8265
iwlwifi-8265-21.ucode
iwlwifi-8265-22.ucode
iwlwifi-8265-27.ucode
...
Note
If the output is empty, install sys-kernel/linux-firmware or download the driver from here
Warning
Some had problems connecting to a 5GHz network with iwlwifi-8265-27.ucode firmware.[1]

For more information on iwlwifi configuration, see the iwlwifi wiki.

KERNEL Enable iwlwifi in kernel 5.4.80-gentoo-r1
[*] Networking support  --->
    -*- Wireless  --->
        <*>   cfg80211 - wireless configuration API
        [*]     enable powersave by default
        <*>   Generic IEEE 802.11 Networking Stack (mac80211)
Device Drivers  --->
    Generic Driver Options  --->
        Firmware loader --->
            (iwlwifi-8265-36.ucode) External blobs to build into the kernel binary
            (/lib/firmware) Firmware blobs root directory
    [*] Network device support  --->
        [*]   Wireless LAN  --->
            [*]   Intel devices
            <*>     Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi)
            <*>       Intel Wireless WiFi MVM Firmware support

No need to enable DVM, 8265 uses iwlmvm:

KERNEL 
< >       Intel Wireless WiFi DVM Firmware support

Hardware WiFi button

To enable the Hardware WiFi button:

KERNEL 
Device Drivers --->
    [*] X86 Platform Specific Device Drivers --->
        <M> HP wireless button

If the wireless button does not work, check the iwlwifi ucode version.

SD card slot

To enable the PCIe Card Reader:

KERNEL Kernel version <4.16
Device Drivers --->
    Multifunction device drivers --->
        <*> Realtek PCI-E card reader
    <*> MMC/SD/SDIO card support --->
        <*> Realtek PCI-E SD/MMC Card Interface Driver
KERNEL Kernel version >4.16
Device Drivers --->
    Misc devices --->
        <*> Realtek PCI-E card reader

Webcam

Setting the following kernel parameters should be enough to be able to use the built-in webcam.

KERNEL Kernel version 4.19.97
Device Drivers --->
    [M] Multimedia support --->
        [*] Media USB Adapters --->
            [M] USB Video Class (UVC)

Video

NVIDIA Optimus

Configure according to NVIDIA/Optimus & the NVIDIA/nvidia-drivers articles.

Note
There is no need to add nvidia to the VIDEO_CARDS variable in /etc/portage/make.conf

This is the necessary Xorg configuration:

FILE /etc/X11/xorg.conf.d/20-nvidia.conf
Section "Module"
    Load "modesetting"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "01:00:0"
    Option "AllowEmptyInitialConfiguration"
EndSection

Be sure to switch the OpenGL drivers before starting X:

root #eselect opengl set nvidia

Intel

See the intel page for up-to-date kernel parameter instructions.
Configure Xorg to use intel driver.

FILE /etc/portage/make.conf
VIDEO_CARDS="intel i915"

Rebuild changed packages.

root #emerge -DaquN @world

Emerge the dated Intel HD Graphics driver.

root #emerge -qan x11-drivers/xf86-video-intel

Configure Xorg file.

FILE /etc/X11/xorg.conf.d/10-intel.conf
Section "Device"
    Identifier "intel"
    Driver "intel"
EndSection
Warning
Be sure to keep the /etc/X11/xorg.conf.d/ directory clean! Do not have a configuration file for NVIDIA optimus & Intel HD Graphics

NVIDIA

First off, add nvidia to VIDEO_CARDS in /etc/portage/make.conf

FILE /etc/portage/make.conf
VIDEO_CARDS="intel i915 nvidia"

Update influenced packages

root #emerge -DaquN @world

Follow the NVIDIA guide for a (mostly) complete configuration.

Important
Disable all Framebuffer devices except the EFI framebuffer. Others may interfere with the boot process, in which you'll may experience a boot freeze.[2].
Note
If you experience a GRUB freeze on boot, try rebooting using ctrl+alt+del and select UMA Graphics or Hybrid Graphics in the BIOS

Set the following kernel parameters to be able to use Discrete Graphics

KERNEL Linux 4.9.76-gentoo-r1
Device Drivers --->
    Graphics support --->
        Frame buffer Devices --->
            -*- Support for frame buffer devices --->
            [*] EFI-based Framebuffer Support

The following configuration enables brightness control, forces full composition pipeline to decrease screen tearing and forces a dpi of 96, which could otherwise give problems in your wm with varying glyph sizes.

FILE /etc/X11/xorg.conf.d/10-nvidia.conf
Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    Option "RegistryDwords" "EnableBrightnessControls=1"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device "nvidia card"
    Monitor "Monitor0"
    Option "metamodes" "nvidia-auto-select +0+0 {ForceFullCompositionPipeline=On}"
EndSection

Section "Monitor"
	Identifier "Monitor0"
	Option "DPI" "96 x 96"
EndSection

Bluetooth

Follow the Bluetooth article on configuring and using Bluetooth.

HP 3D Driveguard

HP 3D Driveguard is a feature of HP laptops that turn off the hard drive when the laptop is falling. To enable HP 3D Driveguard, follow the instructions of the HPfall article.

Troubleshooting

External DisplayPort monitor does not work on PCIe(Thunderbolt 3) port

When using an adapter to connect a DisplayPort monitor to the PCIe port and the monitor does not get recognized, try:

  1. Make sure the adapter is not plugged into the PCIe port;
  2. Disconnect the DisplayPort cable from the adapter;
  3. Plug the adapter into the PCIe port;
  4. Connect the DisplayPort cable.

Now it should work!

NVIDIA brightness control

To enable brightness control, add this line to the conf file

FILE /etc/X11/xorg.conf.d/10-nvidia.conf
Section "Device"
    ...
    Option "RegistryDwords" "EnableBrightnessControl=1"
EndSection

Screen tearing

As the browser is most frequently used: emerge www-client/firefox with USE variable hwaccel. It fixes 99% of smooth scrolling screen tearing. Really a game changer!

For other screen tearing problems, check out x11-misc/compton.

Keyboard layout

To set the keyboard layout to Dvorak Programmer

tty

For terminal:

FILE /etc/conf.d/keymaps
keymap="dvorak programmer"
...

Graphical

For X:

FILE /etc/X11/xorg.conf.d/40-keyboard.conf
Section "InputClass"
    Identifier "keyboard-all"
    Driver "evdev"
    Option "XkbLayout" "us"
    Option "XkbVariant" "dvp"
    MatchIsKeyboard "on"
EndSection

Unable to suspend with Nvidia driver

If you have trouble suspending while on Discrete Graphics, switch to sys-auth/consolekit instead of sys-auth/elogind. This replaces suspend for pm-suspend and should fix the suspend issue. More instructions on switching at Suspend and hibernate.

References

  1. ↑ [1], Arch Linux forum thread about the 5GHz problem.
  2. ↑ [2], The thread explaining the boot hang using an NVIDIA GPU & the wrong kernel framebuffer configuration
Retrieved from "https://wiki.gentoo.org/index.php?title=HP_Zbook_Studio_G4&oldid=1295985"