Talk:Raspberry Pi/Installation
Before creating a discussion or leaving a comment, please read about using talk pages. To create a new discussion, click here. Comments on an existing discussion should be signed using
~~~~:
A comment [[User:Larry|Larry]] 13:52, 13 May 2024 (UTC) : A reply [[User:Sally|Sally]] 12:49, 5 November 2024 (UTC) :: Your reply ~~~~
CFLAGS
Nothing about the /etc/make.conf CFLAGS... same as the stage3???
Note: With stage3-armv6j_hardfp-20120603.tar.bz2 and this cli for QEMU: /usr/bin/qemu-system-arm -kernel zImage -M versatilepb -cpu arm1176 -hda debian6-19-04-2012.img -m 256 -append "root=/dev/sda2 loglevel=7 debug" -serial stdio -hdb gentoo-raspberry-pi.img -hdc swap.img I have a big illegal instruction, official debian provided work.
— The preceding unsigned comment was added by Alpha one x86 (talk • contribs) 11 June 2012
- I added some processor specific CFLAGS --Chithanh 02:46, 23 June 2012 (UTC)
Links
Possibly add some links to the embedded handbook and external resources? — yngwin 14:34, 3 July 2012 (UTC)
- added some Chithanh 14:04, 20 July 2012 (UTC)
sdformat script
A simple script to prepare the card
sdformat#!/bin/bash
device=/dev/sdd
cardsize=`blockdev --getsize64 $device`
sectorsize=512
sectors=63
heads=255
bootsize=52
swapsize=30
cylinders=$(( $cardsize / $heads / $sectors / $sectorsize ))
bootstart=0
rootstart=$(( $bootstart + $bootsize ))
rootsize=$(( $cylinders - $bootstart - $bootsize - $swapsize ))
swapstart=$(( $rootstart + $rootsize ))
parameters="-C $cylinders -S $sectors -H $heads"
sfdisk --force $parameters $device << EOF
$bootstart,$bootsize,0xc,*
$rootstart,$rootsize,0x83
$swapstart,$swapsize,0x82
0,0,0x0
EOF
sleep 5
mkfs.vfat $device"1"
mkfs.ext4 $device"2"
mkswap $device"3"
— The preceding unsigned comment was added by Ccaron (talk • contribs) 2 August 2012
crossdev / march / cflags
The correct crossdev toolchain should be armv6zk-hardfloat-linux-gnueabi :
- http://www.raspberrypi.org/faqs says the soc is based on ARM1176JZFS with vfp (see also http://dev.gentoo.org/~armin76/arm/armhw.xml)
- arm1176jzf-s is an armv6zk see http://dev.gentoo.org/~armin76/arm/chost.xml
So the CFLAGS should contains "-mcpu=arm1176jzf-s -mfpu=vfp -mfloat-abi=hard" (no -march switch as it would conflict with -mcpu)
As i'm waiting for receiving my raspberry pi, i cannot test this for now... Can someone confirm? Would it work with distcc? — The preceding unsigned comment was added by Zeludo (talk • contribs) 26 September 2012
- In my testing, -mcpu=arm1176jzf-s produced code that ran slower on the Raspberry Pi than -march=armv6j --Chithanh 09:56, 3 October 2012 (UTC)
- User:Baldy replaced -march=armv6j with the (IMO worse) -mcpu=arm1176jzf-s without discussion (among with using legacy make.conf location again etc.). I will revert the edits until this discussion is done --Chithanh 12:25, 7 October 2012 (UTC)
- Sorry for jumping in and changing it, I will test both on my RPi and confirm which one is quicker. --Baldy 14:15, 7 October 2012 (UTC)
- http://www.raspberrypi.org/phpBB3/viewtopic.php?f=54&t=17983 discussed the CFLAGS and found none that were generally faster. I'll mark this discussion as done, but it can be revisited with newer gcc. — The preceding unsigned comment was added by Chithanh (talk • contribs) 26 October 2012
Overloading the wiki article with trivial things
Originally, I had intended for the article to be a guide to bring Gentoo to the Raspberry Pi for users who already know how to install Gentoo. I think the quality of this article has gone downhill, with (well-meaning) people adding information that doesn't really help those familiar with installing Gentoo. By now, it is difficult to find the important information among all the trivial parts.
I therefore propose to reduce the article again to highlighting the differences between installing Gentoo on a normal PC and on the Raspberry Pi. Or alternatively, we can turn this article into a hub with links to a quick install guide and a detailed one, and separate articles for troubleshooting and tips&tricks. -- Chithanh 12:25, 7 October 2012 (UTC)
- I had assumed this was meant to be a quick start guide similar to http://www.gentoo.org/doc/en/gentoo-x86-quickinstall.xml. From my experience this guide at the moment is not enough even for someone with Gentoo experience to install on a RPi. For example the -F 16 option to format /boot and being able to use the default kernel.img from github make the process a lot easier. Should I go ahead and create a separate quick start page with more detail? --Baldy 14:27, 7 October 2012 (UTC)
- Have gone ahead and created a Raspberry Pi Quick Install Guide can we link it to this page? --Baldy 14:54, 8 October 2012 (UTC)
- There are a lot of common steps in all install guides. We could probably make templates for a lot of the phases, partitioning, stage/portage-tree install, crossdev stuff. Indeed, only the specific for a particular computer needs to be described. --Wimmuskee 19:27, 27 November 2012 (UTC)
- Since there is already a seperate guide for 64-bit by Roy Bamford (NeddySeagoon) , I think this page could just be an overview of different Pi borads with links to actual (future) guides. --Zucca (talk) 21:37, 5 November 2017 (UTC)
swclock
The article mentions swclock, but it isn't in the tree. The only place I could find a reference to it was in the AUR. Could we at least provide a link to the download, if not some usage instructions? --AdmiralNemo 06:00, 15 December 2012 (UTC)
- It's part of openrc. See:
user $equery files openrc | grep swclock- --Astaecker 06:48, 15 December 2012 (UTC)
Install script
I made an install script for a gentoo variant(funtoo), currently it doesn't boot. Wondering if any1 here might know why, and/or if some1 here might want to fork it to work with gentoo.
Please comment if you like this.
https://github.com/GlassGhost/funtoo-pi/blob/master/funtoo-pi.sh --GlassGhost (talk) 19:13, 19 October 2013 (UTC)
sdformat steps
The article lacks manual steps to define and format partitions. Simple instructions for RPi 2 are found in https://plus.google.com/+WolfgangApolinarski/posts/dNTqe6sVW87 To format the created partitions (it suppose your sdcard is in /dev/sdx, where x is b,c,d,e..):
sdformatmkfs.vfat -F 16 /dev/sdx1
mkfs.ext4 -O ^has_journal -L PiBoot /dev/sdx3
mkswap /dev/sdx2
— The preceding unsigned comment was added by El Salmon (talk • contribs) 2 March 2015
NOOBS image broken
The page's stage-4 section currently refers to a NOOBS image that's supposed to be updated periodically. I tried installing from it and ran into these issues that call its usability into question:
- it doesn't remount / read/write on boot
- it doesn't start the network interface on boot
- gcc is sufficiently broken that it won't compile "hello, world"...it complains that <sys/cdefs.h> is missing
Next step might be to try the quick-start linked below, unless someone has ideas to unbreak this image.
Salfter (talk) 04:24, 29 July 2015 (UTC)
- The NOOBs image support is outside the scope of our wiki. I'll review the article to see if it's still reference anywhere if something in the instructions will contradict the rest of the instructions... --Maffblaster (talk) 15:52, 5 October 2021 (UTC)
- Looks like NOOBs image is still available upstream for download. Certainly the issues have been resolved since no on else has commented on it. I'd recommend using a GenPi64 image as a base to install Gentoo. It's equally as unofficially Gentoo as the NOOBs image. --Maffblaster (talk) 15:58, 5 October 2021 (UTC)
broken link
On Raspberry_Pi there is a link named Gentoo Embedded Handbook, pointing to https://www.gentoo.org/proj/en/base/embedded/handbook/ which ends in a 404 error. — The preceding unsigned comment was added by Kapiteined (talk • contribs) 5 February 2016
- The Embedded Handbook has been migrated and the link is now fixed. Marking discussion as closed. Also, please be sure to sign your comments. --Maffblaster (talk) 21:06, 12 April 2016 (UTC)
What if one want or must to change kernel by using menuconfig with genkernel command? Then which command should be to run? --Best, Pál (talk) 18:17, 13 March 2016 (UTC)
- OK, I realise that that in genkernel-rpi2.conf one can add the option: MENUCONFIG="yes".
- I did so.
- But, I get an error message when start:
- genkernel-rpi.sh
- /usr/bin/genkernel: line 43: /defaults/software.sh: No such file or directory
- Could not read /defaults/software.sh
- How can I solve this problem?
- --Best, Pál (talk) 19:39, 13 March 2016 (UTC)
- What i did as a workaround.
- mkdir /defaults/
- cp /usr/share/genkernel/defaults/software.sh /defaults
- (Next is the genkernel command I used.)
- genkernel --kernel-config=/usr/src/linux-4.4.9999-raspberrypi/myconfig --kernname=gentoo-4.4.15-raspberrypi-g4eda74f-diryCary --menuconfig all
- — The preceding unsigned comment was added by Topspot (talk • contribs) 26 July 2016
- Hi, please remember to sign your comments to discussion pages. Thanks! --Maffblaster (talk) 06:59, 29 December 2016 (UTC)
Manual compilation
Should be mentioned where, in which directory to run these commands:
- ARCH=arm make bcm2709_defconfig
- etc.
--Best, Pál (talk) 18:24, 13 March 2016 (UTC)
- cd /usr/src/linux-4.4.9999-raspberrypi
else it complains about not being able to find the rules to make the bcm2709_defconfig target.
--KLarsen (talk) 11:58, 28 October 2016 (UTC)
I have a question. Its a bit unclear to me where to run the manual compilation. On my ordinary amd64 gentoo or does it has to be done in the above mentioned chroot-quemu method or is it needed to be done on an existing arm system?
--Pauledd (talk) 17:45, 8 August 2017 (UTC)
Passing arguments to kernel make
Now for the second time, someone changed the order of kernel make arguments The correct one is:
root #make ARCH=arm CROSS_COMPILE=armv6j-hardfloat-linux-gnueabi-
Please stop changing this to:
root #ARCH=arm CROSS_COMPILE=armv6j-hardfloat-linux-gnueabi- make
— The preceding unsigned comment was added by Chithanh (talk • contribs) 28 July 2016
- Yes, passing environment variables must be ran before the make command, otherwise the command will see them as arguments. Please remember to sign your comments to discussion pages. Happy holidays and kind regards, --Maffblaster (talk) 06:50, 29 December 2016 (UTC)
New Raspberry Pi 3 64 Bit Guide
The Rasberry Pi 64 bit install guide could do with a link from this page and the intro explaining how hard 64 bit is could be removed. There is even a 64 bit upstream kernel, which is neither advertised nor supported.
The mainline kernel isn't ready yet but its close. Maybe 4.11 ? NeddySeagoon (talk) 19:25, 7 February 2017 (UTC)
- A link to Raspberry Pi 64 bit install has been added. But the whole article should be reviewed for further occurrences of "64 bit". --Charles17 (talk) 07:34, 8 February 2017 (UTC)
- I've removed most of the 64 bit references.
- --NeddySeagoon (talk) 10:38, 20 March 2017 (UTC)
Raspberry Pi 4 as host
Raspbian has gone cruelly slow on Pi Zeros, and probably the other armv6 Pis as well. The gentoo stage4 links here are dead.
My only Gentoo Desktop is a Pi 4, and I'm paying for WiFi right now, and thus don't get to just reconfigure it as I wish.
It took me a week to find Running 32 bit Raspbian Packages on your 64 bit Gentoo System and get a networked chroot running.
Let's mention that armv7/armv8 systems & kernels can run armv6 userlands without trouble, so it's just a chroot and emerge to get the Pi Zero filesystem up.
Ssfr (talk) 07:43, 17 January 2020 (UTC)
- This page is modifiable by all, so please feel free to mention it. If you're able to post a comment then there is nothing preventing you from editing the article. :) Kind regards, --Maffblaster (talk) 00:15, 10 March 2023 (UTC)
new entry: Raspberry Pi Zero 2 W
The Raspberry Pi Zero 2 W was released in October 2021 and should be referenced here. I have two photos of it: front and back. How are photos handled -- I'm not familiar with photo submissions to a Gentoo page? Here is a link to a folder on Google Drive containing both photos: help yourself: https://drive.google.com/drive/folders/1c5srTc0Vpem4zmM0OrbPqCS2HrPxTA9w?usp=sharing
Here's a stab at a description:
Raspberry Pi Zero 2 W is small size single-board computer using a 1GHz quad-core 64-bit Arm Cortex-A53 (four cores vs. 1 for the original Raspberry Pi Zero). Released October, 2021. The Raspberry Pi RP3A0 chip (see photo) is Raspberry's first System-in-Package (aka "SiP") consisting of a Broadcom BCM2710A1 along with 512 MB of DRAM. 32-bit and 64-bit capable and ARMv7 + ARMv8-A support. It has a CSI-2 camera connector, although reports of January 2022 suggest the port only works for 32-bits; it also has H.264, MPEG-4 decode (1080p30) and H.264 encode (1080p30). The ARM Cortex-A53 processor is in the Raspberry Pi 3 since February 2016.
Jlpoole (talk) 20:26, 17 January 2022 (UTC)
- Jlpoole , you can upload photos using this page Special:Upload (NOTE: we can't upload for you, you will need to do it yourself). You MUST choose a license when uploading a photo. The photo description is optional. Once your photos are uploaded, others can use them and link to them... put them in the article, etc. Hope this helps! --Maffblaster (talk) 07:52, 18 January 2022 (UTC)
- Thank you Matthew Marchese (Maffblaster) , 2 Photos Uploaded:
Front Pi Zero 2 W
Back Pi Zero 2 W
